THINKCAR Version: V1.00.001 Statement: THINKCAR owns the complete intellectual property rights for the software used by this product. For any reverse engineering or cracking actions against the software, THINKCAR will block the use of this product and reserve the right to pursue their legal liabilities.
THINKTOOL Pros+/Pros www.mythinkcar.com IC Requirement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,Science and Economic Development Canada’ s licence-exempt RSS(s). Operation is subject to the following two conditions: (1)This device may not cause interference. (2)This device must accept any interference,including interference that may cause undesired operation of the device.
www.mythinkcar.com THINKTOOL Pros+/Pro FCC Requirement &KDQJHV RU PRGL¿ FDWLRQV QRW H[SUHVVO\ DSSURYHG E\ WKH SDUW\ UHVSRQVLEOH IRU FRPSOLDQFH FRXOG YRLG WKH user’ s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
THINKTOOL Pros+/Pros www.mythinkcar.com Copyright Information Copyright © 2020 by THINKCAR TECH CO., LTD(hereinafter referred to as “THINKCAR”). All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying and recording or otherwise, without the prior written permission of THINKCAR. The information contained herein is designed only for the use of this unit.
www.mythinkcar.com THINKTOOL Pros+/Pro The device is a sealed device with no user-serviceable parts inside. All internal repairs must be performed E\ DQ DXWKRUL]HG PDLQWHQDQFH RUJDQL]DWLRQ RU TXDOL¿ HG WHFKQLFLDQ $WWHPSWV WR GLVDVVHPEOH RU PRGLI\ WKH device will void the warranty. Do not try to replace the internal battery The internal rechargeable lithium battery must be replaced by an authorized maintenance organization or TXDOL¿ HG WHFKQLFLDQ &RQWDFW WKH GHDOHU IRU IDFWRU\ UHSODFHPHQW Adapter inf
THINKTOOL Pros+/Pros www.mythinkcar.com Content 1. Quick Start Manual ............................................................................................................1 1.1 Initial Use ............................................................................................................................................. 1 1.1.1 Turn on the Machine ........................................................................................................................ 1 1.1.
www.mythinkcar.com THINKTOOL Pros+/Pro 3.5.13 AFS Reset .................................................................................................................................... 22 3.5.14 A/T Learning ................................................................................................................................. 23 3.5.15 Sunroof Initialization ..................................................................................................................... 23 3.5.
THINKTOOL Pros+/Pros www.mythinkcar.com 1. Quick Start Manual 1.1 Initial Use The following settings should be made when you initially use the tool. 1.1.1 Turn on the Machine After pressing the power button, images will be shown on the screen as follows. 1.1.2 Language Setting Select the tool language from the languages displayed on the interface. 1.1.3 Connect WIFI The system will automatically search all available WIFI networks and you can choose the WIFI needed.
www.mythinkcar.com THINKTOOL Pros+/Pro $IPPTF 5JNF ;POF &KRRVH WKH WLPH ]RQH RI WKH FXUUHQW ORFDWLRQ WKHQ WKH V\VWHP ZLOO DXWRPDWLFDOO\ FR¿ JXUH WKH WLPH DFFRUGLQJ to the time zone you chose. 1.1.5 User Agreement Please read all the terms and conditions of the user agreement carefully. Choose “Agree all the above terms”, and click the “Agree” button to complete the registration process. Then the page will jump to the “Congratulations on your successful registration” interface. 1.1.
THINKTOOL Pros+/Pros www.mythinkcar.com 1.1.7 VCI activation Enter the connector serial number and activation code to activate and bind the diagnostic connector. If you have not activated it, you can also click "Settings" on the main interface to enter and select "Activate" to operate. 7LSV 7KH DFWLYDWLRQ FRGH LV DQ GLJLW QXPEHU DQG LV SDVWHG RQ WKH SDVVZRUG OHWWHU 1.
www.mythinkcar.com THINKTOOL Pros+/Pro 1.3 Function menu Power on the main units, the system will automatically enter into the function menu selection interface: It mainly includes the following features: • The main unit and diagnostic connector support Bluetooth and wired communication. Wired communication is superior to Bluetooth connection in terms of transmission rate and anti-interference. Also wired connection is recommended for online programming function.
THINKTOOL Pros+/Pros www.mythinkcar.com 1.4 Charging Follow the steps below to charge the main unit: Connect one end of the power cord to the USB socket of the power adapter. Connect the other end to the charging jack on the bottom of the main unit. Plug the charger power plug into a power outlet to start charging. When the battery status icon displays , the main unit has been charged. When it displays , the charging process has been completed and you shall disconnect the main unit. 1.
THINKTOOL Pros+/Pro www.mythinkcar.com A Opel, Volkswagen, Audi B Honda C Volkswagen D Opel, Volkswagen, Citroen E Changan F Hyundai, Daewoo, Kia, Honda, Toyota, Nissan,Mitsubishi, Renault, Opel, BMW, Mercedes-Benz, Mazda, Volkswagen, Audi, GM, Chrysler,Peugeot, Regal, Beijing Jeep, Citroen and most prevailing models 1.7 Printer Installation The printer is installed on the back of the main unit. Please follow the steps below: (1) Unscrew the backplane screws and remove the host backplane.
THINKTOOL Pros+/Pros www.mythinkcar.com 2.2 Components & Controls (1) Display (2) Power Key 3UHVV DQG KROG LW IRU VHFRQGV WR WXUQ LW Rႇ Press and hold it for 8 seconds to perform forced shutdown. 3UHVV LW RQFH WR DFWLYDWH RU WXUQ Rႇ WKH GHYLFH (3) Type C Charging Slot: connect the supplied charger for charging (4) USB Port: Reserved for add-on modules and other devices with similar port.
THINKTOOL Pros+/Pro www.mythinkcar.com 2.3 Function Modules THINKTOOL Pros+ support below optional function modules, list as below: S/N 1 2 3 4 .PEVMF /BNF *NBHF EV NPEVMF %FTDSJQUJPO THINK PRINTER Thermal printer, work with the main unit, also can work with moduledock. Quick print diagnostic reports anytime and anywhere. THINK WORKLIGHT High Brightness Work light, ultra-high 25000K white-light with 144 high brightness LED lights. Service life is more than 10,000 hours.
THINKTOOL Pros+/Pros 5 THINK Thermal Imager www.mythinkcar.com 320*240 ultra-high pixel with its own thermal tracking point, which can be used for image superposition (refers to the coincidence of real image and thermal image collected by the camera, so as to achieve more accurate positioning). The thermal sensitivity reaches 0.07 ˫ (32.126 °F), which is more accurate. Higher image acquisition resolution is displayed on the high-definition display.
www.mythinkcar.com THINKTOOL Pros+/Pro 2.4 Parameters THINKTOOL Pros+ host computer • • • • • • • • • • Operating System: Android 10.0 Memory: 4G Storage: 128G(Pros+) / 64G(Pros) Battery: 6000mAh/7.6V Screen: 10 inches Camera: Rear camera 8.0MP Network: Wi-Fi, WLAN 802.11b/g/n Bluetooth: Bluetooth 5.0 Working Temperature: 32 ˭ ~122 ˭ 0˫ ~ 50˫ Storage Temperature: -4 ˭ ~140 ˭ (-20˫ ~ 60˫ 3.
THINKTOOL Pros+/Pros www.mythinkcar.com 3.2 Local Diagnose In this mode, user can manually select vehicle models and systems for diagnosis 3.2.1 Manual Diagnose THINKTOOL Pros+/Pros also supports step-by-step manual selection of menus for diagnosis. To use the "DEMO" as an example to introduce how to start the diagnosis as below. 1) Select vehicle type: click on the "demo " icon on the main diagnostic interface to enter.
www.mythinkcar.com THINKTOOL Pros+/Pro Click "Report" to generate a vehicle health report. B.System Scan: automatically scan all systems of the vehicle C.System Selection: manually choose the automotive electronic control system.
THINKTOOL Pros+/Pros www.mythinkcar.com 3.2.2 System Selection Choose the system: Click “ECM” (e.g.), and the screen will enter selection interface 3.2.3 Function Selection Click the function to be tested 7LSV 7KH GLDJQRVLV PHQX YDULHV ZLWK GL൵ HUHQW YHKLFOHV a) Version Information As shown in the picture, click “Version Information” to read the current version information of the car ECU.
www.mythinkcar.com THINKTOOL Pros+/Pro c) Clear DTC On the diagnostic function selection screen, tap Clear Fault Code, the system will automatically delete the currently existing DTCs and display the dialog box of "DTCs Cleared". 1RWH )RU JHQHUDO PRGHOV SOHDVH RSHUDWH VWULFWO\ DFFRUGLQJ WR WKH QRUPDO VHTXHQFH UHDG '7& FOHDU '7& WHVW WKH FDU UHWULHYH '7& IRU YHUL¿ FDWLRQ UHSDLU WKH FDU FOHDU '7& ± UHFKHFN WKH FDU WR FRQ¿ UP WKDW WKH DTC no longer appears.
THINKTOOL Pros+/Pros www.mythinkcar.com The indicator 1/X shown stands for the current data stream not fully displayed. Swipe the screen from the bottom to the top, to read the remaining parts. There are 3 types of display modes available for data viewing, allowing you to view various types of parameters in the most suitable way. [Graph]: Displays the parameters in waveform graphs. [Value]: This is the default mode which displays the parameters in values and shows in list format.
www.mythinkcar.com THINKTOOL Pros+/Pro Tap to display the current (single) data stream in waveform graph. On the waveform graph page, you can do the following: >0LQ 0D[@ 7DS WR GH¿ QH WKH PD[LPXP PLQLPXP YDOXH 2QFH WKH YDOXH JRHV EH\RQG WKH VSHFL¿ HG YDOXH WKH V\VWHP ZLOO DODUP [ ] [Select data stream sample] >&XVWRPL]H@ 7DS ³ ´RQ WKH ULJKW VLGH RI WKH VFUHHQ WR GH¿ QH WKH GDWD VWUHDP RSWLRQ WR be viewed. 1RWH 0D[ GDWD VWUHDPV FDQ EH GLVSOD\HG 7DS WR VHOHFW WKH VDPSOH '6 ¿ OH $OO WKH
THINKTOOL Pros+/Pros [Report] www.mythinkcar.com Tap to save the value of current data stream. To record diagnostic data, for you to replay and review. Tap “Stop” button to end reading. [Record] [Help] [Data Stream Sampling] 7KH VDYHG ¿ OH IROORZV WKH QDPLQJ UXOH ,W EHJLQV ZLWK YHKLFOH W\SH DQG WKHQ WKH SURGXFW S/N and ends with record starting time. All diagnostic records can be replayed from User Info -> My Report.
www.mythinkcar.com THINKTOOL Pros+/Pro 3.4 Programming(only for THINKTOOL Pros+) ThinkTool Pros+ supports programming and coding, which is to write the relevant control information of the software into the automotive computer’s programmable EPROM or FLASH by making use of the electronic communication transmission technology.
THINKTOOL Pros+/Pros www.mythinkcar.com Before programming, please double-check the following: &KHFN WKH YHKLFOH WXUQ Rႇ WKH HQJLQH DQG LQ QRQ LJQLWLRQ VWDWH Put the transmission into P or N position. 7XUQ Rႇ DOO HOHFWULFDO HTXLSPHQW VXFK DV DLU FRQGLWLRQHU KHDGOLJKWV WXUQ VLJQDOV DXGLR HWF 2WKHUZLVH unstable automotive currents can cause programming interruptions.
www.mythinkcar.com THINKTOOL Pros+/Pro 3.5 Maintenance THINKTOOL Pros+ supports matching, coding, programming of most vehicles’ programable modules, and most commonly used maintenance and reset functions, namely, Oil Reset, Elec.
THINKTOOL Pros+/Pros www.mythinkcar.com a) Main battery is replaced. Battery matching must be performed to clear original low battery information and prevent the related control module from detecting false information. If the related control module detects false information, it will invalidate some electric auxiliary functions, such as automatic start & stop function, sunroof without one-key trigger function, power window without automatic function. b) Battery monitoring sensor.
www.mythinkcar.com THINKTOOL Pros+/Pro 3.5.8 Gear Learning The crankshaft position sensor learns crankshaft gear machining tolerance and saves to the computer WR PRUH DFFXUDWHO\ GLDJQRVH HQJLQH PLV¿ UHV ,I JHDU OHDUQLQJ LV QRW SHUIRUPHG IRU D FDU HTXLSSHG ZLWK Delphi engine, the MIL turns on after the engine is started. The diagnostic device detects the DTC P1336 'gear not learned'. In this case, you must use the diagnostic device to perform gear learning for the car.
THINKTOOL Pros+/Pros www.mythinkcar.com 3.5.14 A/T Learning This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox is GLVDVVHPEOHG RU UHSDLUHG DIWHU VRPH RI WKH FDU EDWWHU\ LV SRZHUHG Rႇ LW ZLOO OHDG WR VKLIW GHOD\ RU LPSDFW problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift quality. 3.5.
www.mythinkcar.com THINKTOOL Pros+/Pro 3.5.22 NOx Sensor Reset NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx) in engine exhaust. If the NOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine ECU. 3.5.23 AdBlue Reset (Diesel Engine Exhaust Gas Filter) $IWHU WKH GLHVHO H[KDXVW WUHDWPHQW À XLG FDU XUHD LV UHSODFHG RU ¿ OOHG XS XUHD UHVHW RSHUDWLRQ LV UHTXLUHG 3.5.
THINKTOOL Pros+/Pros www.mythinkcar.com b) Programming: to program sensor data to a blank Thinkcar sensor, so as to replace a sensor that is in low battery and does not function properly. There are three sensor programming methods available: automatic, manual, and via activation replication. F /HDUQLQJ WR ZULWH WKH VHQVRU ,' LQWR WKH YHKLFOH (&8 IRU VHQVRU LGHQWL¿ FDWLRQ 3.
www.mythinkcar.com THINKTOOL Pros+/Pro Tap OK to enter the vehicle diagnostic feedback selection screen. There are three options: Diagnostic Feedback: to show the list of all tested vehicle models History: Tap to view all diagnostic feedback reverted and the processing progress. 2ႉ LQH /LVW: Tap to display all diagnostic feedback logs which have not been submitted successfully due to network failure. Once the tablet gets a stable network signal, it will be uploaded to the server automatically.
THINKTOOL Pros+/Pros www.mythinkcar.com 3.9 ThinkFile ,W LV XVHG WR UHFRUG DQG HVWDEOLVK WKH ¿ OH RI WKH GLDJQRVHG YHKLFOHV 7KH ¿ OH LV FUHDWHG EDVHG RQ WKH YHKLFOH VIN and check time, including all VIN-related data such as diagnostic reports, data stream records and pictures. 3.10 ThinkStore ThinkStore, released by THINKCAR TECH, in which you can download all diagnostic software and purchase hardware products. In the store, vehicle diagnostic and maintenance software can be bought.
www.mythinkcar.com THINKTOOL Pros+/Pro 4.Software update 4.1 Upgrade all software In order to let you enjoy better functions and upgrade services, we recommend you make software upgrades irregular. When there is a newer software version, the system will remind you to upgrade. Click "Software Upgrade" to enter the upgrade center. There are two function tabs on the upgrade page: Upgradeable software: A list of software that can be upgraded to newer versions.
THINKTOOL Pros+/Pros www.mythinkcar.com 5.2 Activate VCI This item lets you activate a new VCI connectors or get help. Input the Serial Number and Activation Code, and then tap “Activate” to activate it. Once the VCI connector activated, the serial number of it will be displayed in the list. 9&, ¿ UPZDUH UHSDLU 8VHG WR UHSDLU WKH FRQQHFWRU ¿ UPZDUH 'XULQJ WKH UHSDLU SOHDVH GRQ¶W SRZHU Rႇ RU VZLWFK LQWHUIDFHV 5.4 Data Stream Sample 7KLV IHDWXUH DOORZV \RX WR PDQDJH WKH UHFRUGHG GDWD VWUHDP VDPSO
THINKTOOL Pros+/Pro www.mythinkcar.com 5.10 Workshop Management Add the information of the workshop, to which the scanner belongs, and it will be displayed to the customers in the diagnostic report. 5.11 Customer Management Manage information of all customers, who did vehicle diagnostic on this equipment and display in turn. 5.12 Hotkey Setting ,QFOXGLQJ :L )L %OXHWRRWK VFUHHQ UHFRUGLQJ VFUHHQVKRW VFUHHQ À LS EULJKWQHVV DQG VRXQG 6.
THINKTOOL Pros+/Pros www.mythinkcar.com Q: Why can’t make register? Passible reasons Solution The equipment isn’t connected Please make sure the network is connected Notes that your email has been registered.
THINKTOOL Pros+/Pro www.mythinkcar.
THINKTOOL Pros+/Pros www.mythinkcar.com Q: Communication error with vehicle ECU? $ 3OHDVH FRQ¿ UP Whether the VCI is correctly connected and whether the vehicle ignition switch is ON. If all are normal, send vehicle production year, model and VIN number by Feedback feature. Q: Failed to enter into vehicle ECU system? $ 3OHDVH FRQ¿ UP Whether the vehicle is equipped with the system,whether the VCI is correctly connected, and whether the vehicle ignition switch is ON.
www.mythinkcar.com THINKTOOL Pros+/Pro Warranty Terms This warranty applies only to users and distributors who purchase THINKCAR TECH INC products through normal procedures. Within one year from the date of delivery, THINKCAR TECH warrants its electronic products for damages caused by defects in materials or workmanship.
