RC Smoke Screen Racer RC516 User Manual 1
Technical parameters: frequency: 2410-2470MHz Frequency offset range: ±130KHZ; for testing; pulse width test reference range: 40±30us voltage working range: 3.3V-2.1V RF emission current: 19mA±2mA.
10 meters with the purple key controller of LIFTMASTER. Operating instructions: When programming the system, if the keyboard does not receive further commands within 6 seconds, the system will automatically exit the programming mode; When programming the system, if there is misoperation, it will beep twice, and the LED will go out to exit the programming mode. You can wait for the system to automatically exit the programming mode and then re-enter the programming.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.