User Manual

• Before first use, wash all parts with warm, soapy water. Rinse all parts thoroughly and

allow time to dry.

• Contents should not be left in the container for longer than 24 hours. As soon as possible

after each and every use, wash all parts with warm, soapy water. Rinse all parts thoroughly

with clean water. Allow all parts to dry completely prior to next use or storage.

• DO NOT use abrasive cleaners or scrubbers since they may dull the finish.

• DO NOT use bleach or cleaners containing chlorine on any parts of the product.

• HANDWASH ONLY - this product is not dishwasher safe.

• DO NOT immerse or soak in water for prolonged periods of time.

• Residual liquids, foods, or other contents may become trapped between product

components, such as lid parts, container parts, gaskets (flexible band around lid and/or

stopper), or straws (if present in the product). Hand washing is recommended to ensure

that all parts of the product are thoroughly cleaned.

Hard Spout Locking-Ring Lid:

Image for reference only: actual product may vary

PAGE 1
C • • • • • • • Before first use, wash all parts with warm, soapy water. Rinse all parts thoroughly and allow time to dry. Contents should not be left in the container for longer than 24 hours. As soon as possible after each and every use, wash all parts with warm, soapy water. Rinse all parts thoroughly with clean water. Allow all parts to dry completely prior to next use or storage. DO NOT use abrasive cleaners or scrubbers since they may dull the finish.
PAGE 2
1. 2. 3. 4. 5. 6. 7. 8. 9.           Remove lid (A) by twisting counterclockwise. Pull down the locking-ring (B) located on lid (A) of the bottle. Press the push-button (D) on the lid (A) to open lid cover (C). Pull out spout gasket (C1) from underside of lid cover (C) to completely remove it. Remove the o-ring gasket (A1) from underside of lid. Wash all parts separately and re-assemble. a. Ensure gaskets (A1 and C1) are properly seated to minimize leaking Fill container with beverage.
PAGE 3
tear or color fading, or any condition affected by abuse, neglect, alteration, accident or improper use or maintenance. We will, at our option, repair or replace any product component part that fails to conform to this warranty within 30 days after its receipt by our factory service department. IN NO EVENT WILL THERMOS BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES.