Digital Photo Frame DPF-802C Series USER MANUAL 1
Table of Content 1. Introduction...........................................................................................................................3 2. Key Features.........................................................................................................................3 3. Maintance..............................................................................................................................3 3.1 Cleaning the Display.....................................................
Dear customer, thank you for choosing our product. For safety, please read this manual carefully before connecting and adjusting the settings of the product. FCC Statement: This equipment has been tested and found to comply with the limits for Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Power: AC adapter 110 ~ 240 V / 50 ~ 60 Hz - DC 5V / 1.0A - Weight: approximately 460g (excluding power supply) - Dimensions: 227 x 185 x 25mm (without stand). - Operating temperature for outdoor : -20 ° C - 40 ° C - Operating Humidity: 10% - 75% - Supported Cards: Secure DigitalTM (SD), MultiMediaCardTM (MMC), Memory Stick ™ (MS) - USB OTG: USB 2.0 / USB 1.1 Host - Photo Formats: JPEG - Slideshow: 8 transition effects 3 Maintance • The 378NC is for internal use.
4 Appearance and Key Directions 4.
3) ─ Turn on/off 4) Settings ─ Access the setup menu 5) Photo ─ Start playing photos 6) File ─ Explore file manager 7) F°/C° ─ Convert degrees Celsius to Fahrenheit and vice versa 8) MENU ─ Main Menu 9) ─ UP / Light Sensor ─ Left / rotate images 90 ° counterclockwise 10) ─ Right / rotate images 90 ° clockwise 11) 12) ─ DOWN or buttons . 13) ROTATE ─ Rotate function. Then press the 14) OK/ENTER ─ Confirm selection.
10) SD/MMC/MS SLOT ─ To insert media files 11) Power ─ Power input 4.3 External Sensor 378NC uses a wireless outdoor sensor to measure temperature and humidity in the room or outside. Insert batteries in the sensor. The sensor uses 2 AAA batteries (not included). 1. Remove the 2 screws holding the battery cover. 2. Remove the cover. 3. Insert 2 batteries. 4. Install the cover and screw. 5 Command Summary 5.
Use the and keys to move to the desired menu and press OK to confirm the selection. To return to the main menu, press the MENU button on the remote control. 5.3.1 Main Menu The main menu contains the following icons: • Photo -- Play pictures stored in memory card or auto playback (slideshow) • Weather -- Display weather information with the reproduction of images. • Calendar -- Show Clock and Calendar with photos. • File -- Explore and manage the files.
USB device SD card If only insert an SD card, you will see photos of the SD card. If there is also USB drive inserted, it will display with priority the images of USB drive and then display the images in the SD card. Select the key or to switch. In the preview mode, select your desire photo with and press ENTER to confirm. The photo is displayed full screen. Then press to move to previous or next image respectively . Zoom Press the key on the remote control to enlarge the image.
on the remote control to change the unit of measure for degrees from Celsius Press the key to Fahrenheit and vice versa. See image below: Gradi Fahrenheit Gradi Centigradi On the right side of the screen will show the degree of comfort besides the weather situation, varying from comfortable, wet to dry. Trend Forecast The icons show the tendency of weather conditions in the next 8 hours within a radius of about 30km.
5.3.4 Calendar Menu From the main menu, select the icon to enter the calendar menu directly. Box with time, calendar and photo will appear as below. If there are images in the memory card or USB Drive, it will automatically display in sequence (slideshow the pictures). Note: Press the key 5.3.5 on the remote control to access the time display screen. File Explorer From the main menu, select the icon on the remote control to enter file management directly.
5.3.6 Setting From the main menu, select the icon and press ENTER to confirm. The screen will show where you can adjust and modify the internal settings of the 378NC: on the remote control to access the setting display instantly. Note: Press the key Scroll through the list of settings on the left to a position of what you want, then press OK to confirm. Use the arrow keys to change value and press OK to confirm.
Display Setting Date Setting Time Setting Brightness Contrast Saturation Hue Day Month Year Hours Minutes AM/PM Duration Set the values for brightness, contrast and color saturationof the screen Set the date of the calendar menu Set the time schedule of the menu Photo Setting Transition Effects Language(OSD) English/French/German/Spanish /Italian/Portuguese/Ploski/Russia n Light Sensor Off/ On Set exposure time of photos Set transition effect of photos or random Select the OSD language Enable/disa
Problem The frame doesn’t turn on Cause The power adaptor is not inserted properly Corrective Action Make sure the cable is properly inserted in the frame and the wall socket, then press the power button on the remote control. Even without a memory card inserted, the frame will turn on and show a white screen.
7 FCC Statement: This equipment has been tested and found to comply with the limits for Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
