4. When the alarm sounds press the LIGHT/SNZ button (on front or back of monitor), the alarm will sound again in 5 minutes. 5. To turn the alarm off press the ALARM button when the alarm sounds. 6.0 Maximum and Minimum Memory 1. Press the MAX/MIN button once to display the maximum indoor and outdoor temperature readings. Press the MAX/MIN button again to display the minimum indoor and outdoor temperature readings. 2. To clear the memory, press and hold the MAX/MIN button for 3 seconds.
5.0 Réglage du déclenchement de l’heure de l’alarme 1. Pour régler l’heure du déclenchement de l’alarme, appuyez et tenez enfoncé le bouton ALARM jusqu’à ce que le chiffre de l’heure se mette à clignoter. 2. Appuyez sur le bouton UP ou DOWN pour régler l’heure exacte. 3. Appuyez sur le bouton ALARM pour confirmer le réglage. 4. Puis les chiffres des minutes clignoteront; appuyez sur le bouton UP ou DOWN pour régler les minutes exactes. 5. Appuyez sur le bouton ALARM pour confirmer le réglage. 6.
À l’extérieur 60 secondes Précision de la mesure de température +/- 2°C (+/- 4°F) Alimentation électrique Moniteur 3 piles AAA, 1,5V (non comprises) ou un adaptateur 4,5 V (compris) Capteur extérieur 2 piles AAA, 1,5V (il est recommandé d’utiliser des piles au lithium pendant les mois d’hiver). 9.
FCC Statement: This equipment has been tested and found to comply with the limits for Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.