User Manual

ManualsBrandsThermor ManualsElectronicsIndoor/Outdoor Digital Thermometer with Color Screen

Table Of Contents

RS8736LSPZ Manual

Ⅰ. Main Functions:

1. Six function keys: TIME, UP, DOWN, ALM, CH, LIGHT/SNOOZE

2. Weather forecast for 5 states: sunny, semi-sunny, cloudy, rainy, storm

3. Eight moon phase

4. Indication of the comfort index

5. Snooze for 8 minutes. Adjustable for snooze time from 5 to 30 minutes.

6. 12/24 hour selectable

7. ℃/℉ selectable

8. MD/DM selectable; Digital time display: Hour, Minute, Second

9. Year range is 2000-2099, display: Month, Date, Week

10.Indoor temperature range: 0℃--+50℃.

11.Indoor humidity range: 20%-----99%.

12.Outdoor temperature range: -20℃--+60℃.

13.Outdoor humidity range: 20%-----99%.

14.Outdoor temperature/humidity: up to 3 channels

15.Pressure Bar Indicate History Trend

16.Double Alarm/Alert

17.Indoor/Outdoor trend indication of temperature/humidity.

18.LED backlight

II. The initial display when Power-on or Reset

1, The weather forecast: according to current pressure and temperature/humidity change.

2, Setting automatically quit: 8 seconds

3, Forward/backward: 8 steps / second

4, Year: 2009-1-1

5, Time: 0:00

6, Temperature: ℃ Pressure: hPa & mb

7, Alarm & Alert: closed

III. Power-on

1, When Power-On and reset, LCD full display for 3 seconds Æ enter the normal state after “Beep” Æ check

temperature, humidity and pressure.

2, It will then enter into RF registering/receiving for 3 minutes.

IV. Instruction of operating the KEYS

TIME ALARM UP DOWN SNZ/LGT CHANNEL

Click Time/ year

switchable

AL1 / AL2 /

Time

switchable

ON/ OFF ALARM

---- 8seconds Back

light / Enter

Snooze

Switchable between

CH1, 2, 3 and circled

display

standard mode

Hold enter into

calendar setting Alarm

setting

Switch the unit of

temperature and

pressure

---- Enter into

SNOOZE time

setting

clear current

registered CH

Function

Operation

Summary of content (5 pages)

PAGE 1
RS8736LSPZ Manual Ⅰ. Main Functions: 1. Six function keys: TIME, UP, DOWN, ALM, CH, LIGHT/SNOOZE 2. Weather forecast for 5 states: sunny, semi-sunny, cloudy, rainy, storm 3. Eight moon phase 4. Indication of the comfort index 5. Snooze for 8 minutes. Adjustable for snooze time from 5 to 30 minutes. 6. 12/24 hour selectable 7. ℃/℉ selectable 8. MD/DM selectable; Digital time display: Hour, Minute, Second 9. Year range is 2000-2099, display: Month, Date, Week 10.Indoor temperature range: 0℃--+50℃. 11.
PAGE 2
Setting mode Click Confirm the Confirm the setting and into setting and into next setting next setting one step forward One step backward Under the ----- SNOOZE setting status, quit the setting Hold V. ----- ------ 8steps/second 8steps/second forward backward ----- Operate Instruction 5.1 TIME 1. At normal status, press TIME to switch normal status and year. In year status, it will exit automatically if no key is operated for 8 seconds. 2.
PAGE 3
Press UP/DOWN to adjust it and press TIME to confirm the setting. 6.2 The function of alarm 1. At normal status, press ALM for 3 seconds into alarm setting. When it shows AL1, then hold ALM to enter into AL1 time setting. When it shows AL2, then hold ALM to enter into AL2 time setting. 2. At setting status, the setting item will flash., and press ALM to enter into next setting. The sequence of setting is ALARM hour –ALARM minute –exit. 3.
PAGE 4
+20 °C COMFORT to +28 °C -5°C WET to +50 °C Less than 20 °C NO INDICATION - or more than 28 °C 40% to 70% Over 70% Less than 40% or more than 70% 6.6 The receiving function of RF 1. After installing the battery and checking temperature/humidity, it will enter RF receiving state automatically for 3 minutes. 2. under normal display mode, hold the “Channel” key for 3 seconds to clear out the channel information 3.
PAGE 5
FCC Statement: This equipment has been tested and found to comply with the limits for Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.