Installation Sheet

2.3" (56.5mm)

0.33" (8.5mm)

8" (200mm)

EPDM Gasket

Flow Restrictor

Brass Joint Ball

Protective Cap

EPDM Screen Washer

Stainless Steel

Shower Head

8” Round shower head Installation instruction

1. Wrap Teflon tape clockwise

2. Attach shower head to shower

arm and rotate clock wise by hand,

then tighten with a wrench.

This shower head is supplied with a blue 1.6 GPM

flow restrictor and meets CEC Requirements.

If you are not satisfied with the flow, non-California

residents can replace the restrictor with this white

2.5GPM restrictor. Check local water conservation

codes before changing the restrictor.

IMPORTANT: Re-insert protective stainless-steel

screen on top of restrictor.

Shower Head Installation Suggestion Only.

Teflon Tape and Shower Arm are excluded

in Shower Head Packing box.

Use a licensed plumber

for installation