User Manual
Wave Duo™ Smart Vibrating Roller from the makers of Theragun.
Using the Wave Duo 1. To turn on the Wave Duo, firmly press and hold the power button for 1-2 seconds. 2. Press the main button to increase speeds. After the highest speed, if the button is pressed again the Wave Duo will come back to the lowest speed. 3. Place the device under the treatment area gradually applying light to moderate pressure as needed. 4. To turn off the Wave Duo, firmly press and hold the power button until the device turns off.
Charging the Wave Duo 1. The Wave Duo is USB-C enabled. Plug the cable into your USB adapter of choice for charging. The Wave Duo is fast charging enabled and can be charged directly through a USB-C charger (sold separately) for a faster charging experience. 2. The LED light on the power button will flash until fully charged. 3. Charging is complete when the LED light on the power button is solid green. 4. Battery level is continuously displayed on the LED light of the power button when the device is on.
Born in Los Angeles, CA. Designed for everybody.