Getting started Step 1 Turn on and float Firmly press and hold the center button on the button pad, then float the Theragun Prime across areas in need. Use the up ( ) and down (v) buttons on the button pad to adjust speed. Apply light to moderate pressure as needed. v Step 2 Get the Theragun app We’ll guide you through a stress-free setup and show you how to get the most out of your fully personalized app experience. Step 3 Feel the difference.™ Every day.
The Theragun Prime See Warnings insert for important safety instructions LED battery indicator Theragun Triangle™ multi-grip LED speed indicator Charging port Button pad Interchangeable attachments
Using the Theragun Prime 1. To turn on the Theragun Prime, firmly press and hold the center button on the button pad. 2. Press the up ( ) and down (v) arrows to toggle between 5 preset speeds and adjust your treatment level. 3. To turn off the Theragun Prime, firmly press and hold the center button on the button pad.
Charging the Theragun Prime 1. After turning off the device, plug the power adapter into the charging port of the Theragun Prime. 2. The LED battery indicator, located under the 5 LED speed indicator bars, will start flashing. 3. Charging is complete when all 3 LED lights of the LED battery indicator are lit. Connecting the attachments Align the attachment with the tip of the rotating arm and push to connect. To remove, grip the attachment, placing 1 finger on each side of the plastic connector.
Smart Features Your Theragun Prime is smart device enabled with Bluetooth connectivity, designed to pair seamlessly with the Theragun app. When you download the app, you’ll be guided through a step-by-step setup and shown how to pair your device. Once paired with your device, the app can remotely adjust speed, activate guided treatment presets, and make real-time recommendations based on your feedback and recent activity.
Attachments Your Theragun Prime comes with 4 different attachments designed for every muscle and need.
Regulatory Information FCC Information: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
IC Information: -English: 1. This device complies with Industry Canada RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Born in Los Angeles, CA. Designed for everybody.