Installation & Assembly

ManualsBrandsThe Twillery Co. ManualsFurnitureMiriam 38.62'' Steel Kitchen Cart with Stainless Steel Top and Locking Wheels

SLIP SLEEVE

(32) + (2) extra

LOCKING

CASTER (2)

BASKET (1)

SIDEBAR

w/4 HOOKS (1)

SHELF (1)

HANDLE (1)

TOP POLE (4)

End Cap (4) and

Pole Connector (4)

are pre-installed

BOTTOM POLE (4)

Threaded Insert (4)

is pre-installed

A B C D

E F G H

I J K

WRENCH (1)NON-LOCKING

CASTER (2)

Note: The black circular plastic spacers in between Shelves are used only for packaging

purposes. They are NOT needed. Please discard.

STAINLESS STEEL

TOP (1)

PARTS LIST

Your Stainless Steel Top Kitchen Cart should include the following parts. Please inspect box

contents to ensure you have received all components.

If you are missing any parts, need assistance with assembly or have questions, please contact ŽƵƌ

Customer Service.

Summary of content (5 pages)

PAGE 1
PARTS LIST Your Stainless Steel Top Kitchen Cart should include the following parts. Please inspect box contents to ensure you have received all components. If you are missing any parts, need assistance with assembly or have questions, please contact ŽƵƌ Customer Service.
PAGE 2
ASSEMBLY INSTRUCTIONS STEP 1 Screw CASTERS (I & J) into each BOTTOM POLE (A). Turn clockwise to screw in place. A (4) Use provided WRENCH (K) to tighten completely. Failure to do as instructed could result in caster stem breaking. J (2) I (2) K (1) A A K K I J STEP 2 On BOTTOM POLE (A), place 1 pair of SLIP SLEEVES (H) at desired height no higher than 3rd indentation from bottom. Make sure arrow faces up and word “TOP” is right-side up. Do this for each BOTTOM POLE (A).
PAGE 3
ASSEMBLY INSTRUCTIONS STEP 3 C Place SHELF (C) on its side and slide each BOTTOM POLE (A) through each corner cylinder of SHELF (C). Make sure LOCKING CASTERS (I) are on same side and make sure corner cylinders are positioned over SLIP SLEEVES (H). C (1) Slowly stand unit upright. Note: Level side of SHELF (C) is TOP side. Use a rubber mallet, if needed, to secure SHELF (C). A C STEP 4 Screw TOP POLES (B) into BOTTOM POLES (A) in clockwise direction.
PAGE 4
ASSEMBLY INSTRUCTIONS STEP 5 Repeat STEP 2 & 3 to assemble BASKET (D). Make sure SLIP SLEEVES (H) height is identical. D (1) H (8) G (1) H (8) D Note: Use a rubber mallet, if needed, to secure BASKET (D). STEP 6 Attach one pair of SLIP SLEEVES (H) to poles on shorter side of Kitchen Cart as shown. F (1) Slide HANDLE (F) onto poles, making sure corner cylinders are positioned over SLIP SLEEVES (H). F Repeat STEP to attach SIDEBAR (G) onto opposite side of Kitchen Cart.
PAGE 5
ASSEMBLY INSTRUCTIONS STEP 7 Repeat Step 2 for STAINLESS STEEL TOP (E) and place SLIP SLEEVES (H) at highest position on TOP POLES (B). Slide STAINLESS STEEL TOP (E) onto SLIP SLEEVES (H).