Table of Consents wt Introduction Jou Safety Environment Wireless Note |e sn Product Description 5.1 Receiver 5.2 Body pack Transmitter 6. Basic Connections 7. Seedling 7.1 Connecting the receiver to power 7.2 Connecting the receiver to an audio mixer or an amplifier 7.3 Inserting batteries into the body pack 7.4 Setting up body pack transmitter 8. Trouble-shooting 8. System Specification 10. Frequency/Channel reference table 11.
1. Introduction Thank you for purchasing the TWS16PT. This wireless microphone system operates in UHF band frequency with synthesizer controlled. Each system with 16 delectable frequencies and phase locked loop (PLL) circuity makes it easy to choose non-interfered channels. Please read this instruction manual carefully before operating the system. This manual covers the function and operation of the wireless system. 2. Safety Do not spill liquid on the appliance and donor drop iron a hard concrete floor.
= §. Product Description 5 5.1. Receiver 0 a Front View: Out: Connect the supplied cabs to the receiver and the microphone. It takes about 10 hours to recharge. The LED of the transmitter is flashing all the time. Use rechargeable batteries only! 2. Power: Power on push button switch 3. Channel Selector: Changes receiver channel! sealing. 4. Power Indicator: The indicator LED lights when the receiver is powered on and ready fo operate. 5.
Rear View: 1. Antenna: 2. Balanced Output: 3. Unbalanced Output: 4. Squelch Adjust: 5. DC input: Mounting Fixed length UHF antenna permanently mounted. Balanced 3-pin. XLR audio output for connecting to a microphone input, a mixing console or an amplifier. Unbalanced 6.3mm mono jack audio output. The squelch adjusts the output level prevent from external noise. Setting the squelch to high will reduce the range of the system. Set the squelch to minimum before turning the receiver on.
Charging Connecting Diagram Connect the supplied DC cable to the receiver and the microphone. It takes around 10 hours to recharge the batteries. The LED of the transmitter is flashing all the time. Use rechargeable batteries only! 5.2 Body pack Transmitter The Body pack transmitter operates in UHF band frequency with PLL synthesized control. Use 2 pcs. 1,5V AA batteries or rechargeable batteries for low operating costs. 1.
. Low Battery LED: This LED indicates the battery status. Switching the power to “ON”, the LED flashing once indicates that the transmitter has sufficient power. if the LED stays on, it indicates that the battery has insufficient power and should be changed or recharged soon. If the status LED fails to flash, the battery is either dead or not positions correctly, and you should correct the positioning or change the battery. 8.
Setting Up NOTICE: Prior to setting up, check that the transmitter and receiver are tuned to the same frequency. Two or above transmitters operating in the same frequency can not be used at the same time and area, so please select the different frequencies which can be used simultaneously at local area. 7.1 Connecting the receiver to power Check if the voltage of the supplied AC adapter conforms fo the voltage {230V, 50Hz) available in local area.
7.4 Setting up the body pack transmitter Connecting a Microphone: Push the MIC/LINE switch to “MIC” and use the supplied screwdriver to adjust the GAIN (MIC Adj.) at appropriate position. Plug the mini XLR connector of the microphone cable into the audio input connector on the body pack transmitter. Switch on the transmitter. Test the microphone and adjust the levels on your audio mixer or amplifier.
10. Channelization! Reference Table 800.875 MHz 811.875 MHz £ i Ne Channel 1 800.875 MHz Channel 9 806.625 MHz 8 Channel 2 801.375 MHz Channel 10 807.375 MHz Q Channel 3 802.375 MHz Channel 11 807 875 MHz le Channel 4 803.125 MHz Channel 12 808.375 MHz Channel 5 803.875 MHz Channel 13 808.125 MHz Channel 6 804.500 MHz Channel 14 810.250 MHz go Channel 7 805.125 MHz Channel 15 810.875 MHz 8 Channel 8 805.875 MHz Channel 16 811.875 MHz f: 854.375 MHz 861.875 MHz o Channel 1 854.375 MHz Channel 9 858.
@ 20058 Musicians Thomas $6138 Cheeseburger. Technical specifications and appearances subject io change without notice. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photo copying and recording of any kind, for any purpose, without the express written permission of Musicians Thomas.