Data Sheet
Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • Germany • www.thomann.de
DocID: 436138_06.06.2019
EN
For the transport and protective packaging, environmentally
friendly materials have been chosen that can be supplied to normal
recycling. Ensure that plastic bags, packaging, etc. are properly dis-
posed of. Do not just dispose of these materials with your normal house-
hold waste, but make sure that they are collected for recycling. Please fol-
low the notes and markings on the packaging.
This product is subject to the European Waste Electrical and Elec-
tronic Equipment Directive (WEEE) in its currently valid version. Do
not dispose of your old device with your normal household waste.
Dispose of this product through an approved waste disposal rm or
through your local waste facility. Comply with the rules and regulations that
apply in your country. If in doubt, consult your local waste disposal facility.
BD 500 Beta -
Condenser Boundary Layer Microphone
Connection / Supply XLR / P48
Transducer concept Back electret condenser
Directivity Half cardioid
Frequency response 30 - 20.000Hz
Impedance 250Ω ±20%
Sensitivity -53dB±3dB (0dB=1V/Pa,1kHz)
Maximum SPL 140dBSPL@1%THD
Dimensions 95×123mm
Weight 480g
Caution!
X Never drop the mic, as this may cause severe damage!
X When the microphone is not in use, take it out of its clamp
and put it in its case. Clean with damp cloth only.
Polar pattern @ 1 kHz
9 Switchable frequency response for bass drum or piano /
speech applications
9 Robust metal housing
9 Hanging holes at the back
9 Underside with non-slip rubber for rmness and protection
against surfaces