Quick start guide

Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • [e-mail] DocID: 501460_11.05.2021
EN
BC 500
Quick start guide
This quick start guide contains important information on the safe operation of the
product. Read and follow the safety advice and instructions given. Retain the quick
start guide for future reference. If you pass the product on to others please include
this quick start guide.
Features
• Dynamic broadcast microphone
• Specically designed for broadcast, web casting and recording
• Flat and wide frequency response
• The recording is clear and ne
• The cardioid polar pattern can suppress sound feedback and isolate
the ambient sound
• 200 Hz low-cut and mid-high frequency boost switches
• 5/8" thread receptacle with reducing thread to 3/8"
Technical specications
Connection XLR 3-pin
Transducer concept Dynamic
Directivity Cardioid
Frequency response 50–16.000Hz
Sound pressure level (max.) 135dB
Sensitivity -58dB (0dB = 1V / Pa @ 1kHz)
Impedance 200Ω (@ 1kHz)
Dimensions 187×Ø60mm
Weight 0.73kg
Colour black
Ambient conditions Temperature range: 0–40°C
Relative humidity: 20–80%, (non condensing
Safety instructions
Intended use
This device is used to convert acoustic signals into electrical ones. Any other use or
use under other operating conditions is considered to be improper and may result
in personal injury or property damage. No liability will be assumed for damages re-
sulting from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are
not within reach of babies and young children. Choking hazard! Ensure
that children do not detach any small parts (e.g. knobs or the like) from the
unit. They could swallow the pieces and choke! Never let unattended chil-
dren use electrical devices.
Caution
• Never remove the screen holding the capsule, as this may damage the microphone!
• Never drop the mic, as this may cause severe damage!
• When the microphone is not in use, take it out of its clamp and put it in its case.
Clean with damp cloth only.
Where to use the product
Never use the product
• in direct sunlight
• in conditions of extreme temperature or humidity
• in extremely dusty or dirty areas
• at locations where the unit can become wet
• near magnetic elds
General handling
• To prevent damage, never use force when operating the device.
• Never immerse the appliance in water. Just wipe it with a clean dry cloth. Do not use
liquid cleaners such as benzene, thinners or ammable cleaning agents.
Keep foreign substances from the unit!
Keep the device away from containers with liquids. Should any liquid get into the unit,
this could lead to its destruction or re. Be sure not to let any metal objects into the
unit.


 
Operating elements
1. Microphone head
2. Microphone bracket
3. XLR connection
4. Thread adapter from 5/8 "external thread to 3/8" internal thread
Using the product
1. Attach the microphone to the bracket using the screw. Move it to the desired
position and hand-tighten the locking screw. Attach the microphone bracket to a
suitable stand, using the thread adapter if necessary.
2. Use a suitable XLR microphone cable to connect the XLR connection of the mi-
crophone to the input of the desired audio device, e. B. a mixer, audio interface
or recording device. The microphone does not require phantom power.
3. Sing or speak in the direction of the microphone head.
Frequency response
Flat Response Mid-Range EmphasisBass Rollo
For the transport and protective packaging, environmentally friendly materials
have been chosen that can be supplied to normal recycling. Ensure that plastic
bags, packaging, etc. are properly disposed of. Do not just dispose of these ma-
terials with your normal household waste, but make sure that they are collected
for recycling. Please follow the notes and markings on the packaging.
This product is subject to the European Waste Electrical and Electronic Equip-
ment Directive (WEEE) in its currently valid version. Do not dispose of your old
device with your normal household waste. Dispose of this product through an
approved waste disposal rm or through your local waste facility. Comply with
the rules and regulations that apply in your country. If in doubt, consult your lo-
cal waste disposal facility.