Specification
The Energy Guardian®
Universal Hatch Cover
The Energy Guardian® Universal Hatch Cover
insulates attic access panels of various sizes while
also providing easy access to the attic for the
homeowner. The unit is installed in the attic and
requires no modications to the living space area.
When assembled, the kit has maximum outside
dimensions up to: 10” H x 32” W x 36” L (inside
dimension are up to 10” H x 28” W x 32” L).
Uses
The Energy Guardian® Universal Hatch Cover
closes the gap in the building thermal barrier created
by attic hatch accesses in existing as well as newly
constructed residential housing, causing reduced
energy costs in both hot and cold weather.
The product is designed to cover attic access panels
in stick-built or trussed roof construction.
When properly installed, the system will stop a
major source of energy loss in both hot and cold
weather, improve the comfort of the home, save
on both heating and cooling costs and eliminate a
major cause of ice damming and mold.
Product Attributes
The Energy Guardian® Universal Hatch Cover
is a system made of high density expanded
polystyrene. This material is safe, emits virtually
no off gassing and provides increased insulating
value as the outside temperature decreases. (See
table on reverse) The Kit has an R-20 insulating
value (shipping weight of 7 lbs.). An alternate
version has an R-38 insulating value (shipping
weight of 10 lbs.). Accessory packs are available
to increase the R-Value to R-49 or higher in order
to meet any local requirements.
The patented design of the Kit provides several
important advantages:
• As an assembled system, it meets all requirements
of the 2009 & 2012 editions of the International
Energy Conservation Code (IECC), International
Residential Code (IRC) and other Federal and State
mandates. It contains both the high insulating value
and durable air seal needed to stop the energy loss
due to the attic access.
• The separate frame provides the required wood or
equivalent protective barrier.
• Provides a consistent, professional solution
• Lightweight lid for use by all ages
• Fast, easy installation
• The kits are made in the USA
ESS Energy Products, Inc.
P.O. Box 400
Paoli, PA 19335