Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsDiodesTPD2E001DRLR

0.1 µF

USB

Controller

BUS

D+

D–

GND

IO2

IO1

Product

Folder

Sample &

Buy

Technical

Documents

Tools &

Software

Support &

Community

TPD2E001

SLLS684H –JULY 2006–REVISED AUGUST 2014

TPD2E001 Low-Capacitance 2-Channel ESD-Protection for High-Speed Data Interfaces

1 Features 3 Description

The TPD2E001 is a two-channel Transient Voltage

• IEC 61000-4-2 ESD Protection (Level 4)

Suppressor (TVS) based Electrostatic Discharge

– ±8 kV Contact Discharge

(ESD) protection diode array. The TPD2E001 is rated

– ±15 kV Air-Gap Discharge

to dissipate ESD strikes at the maximum level

specified in the IEC 61000-4-2 Level 4 international

• IO Capacitance: 1.5 pF (Typ)

standard.

• Low Leakage Current: 1 nA (Max)

The DRS package (3.00 mm x 3.00 mm) is also

• Low Supply Current: 1 nA

available as a non-magnetic package for medical

• 0.9-V to 5.5-V Supply-Voltage Range

imaging applications.

• Space-Saving DRL, DRY, and QFN Package

See also TPD2E2U06DRLR which is p2p compatible

Options

to TPD2E001DRLR and offers higher IEC ESD

• Alternate 3, 4, 6-Channel options Available:

Protection, lower clamping voltage, and eliminates

TPD3E001, TPD4E001, TPD6E001

the input capacitor requirement.

2 Applications

Device Information

(1)

PART NUMBER PACKAGE BODY SIZE (NOM)

• USB 2.0

SOT (5) 1.60 mm x 1.20 mm

• Ethernet

WSON (6) 3.00 mm x 3.00 mm

• FireWire™

TPD2E001

USON (6) 1.45 mm x 1.00 mm

• LVDS

SOP (4) 2.90 mm x 1.30 mm

• SVGA Video Connections

(1) For all available packages, see the orderable addendum at

• Glucose Meters

the end of the datasheet.

• Medical Imaging

Application Schematic

An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,

intellectual property matters and other important disclaimers. UNLESS OTHERWISE NOTED, this document contains PRODUCTION

DATA.

Summary of content (24 pages)

PAGE 1
Sample & Buy Product Folder Support & Community Tools & Software Technical Documents TPD2E001 SLLS684H – JULY 2006 – REVISED AUGUST 2014 TPD2E001 Low-Capacitance 2-Channel ESD-Protection for High-Speed Data Interfaces 1 Features 3 Description • The TPD2E001 is a two-channel Transient Voltage Suppressor (TVS) based Electrostatic Discharge (ESD) protection diode array. The TPD2E001 is rated to dissipate ESD strikes at the maximum level specified in the IEC 61000-4-2 Level 4 international standard.
PAGE 2
TPD2E001 SLLS684H – JULY 2006 – REVISED AUGUST 2014 www.ti.com Table of Contents 1 2 3 4 5 6 7 Features .................................................................. Applications ........................................................... Description ............................................................. Revision History..................................................... Pin Configuration and Functions ......................... Specifications................................................
PAGE 3
TPD2E001 www.ti.com SLLS684H – JULY 2006 – REVISED AUGUST 2014 5 Pin Configuration and Functions DRL PACKAGE (TOP VIEW) DRY PACKAGE (TOP VIEW) VCC 1 VCC 1 6 IO2 N.C. 2 5 N.C. N.C. 2 IO1 3 4 GND IO1 3 DZD PACKAGE (TOP VIEW) DRS PACKAGE (TOP VIEW) GND IO2 5 VCC 1 N.C. 2 IO1 3 GND 6 IO2 5 N.C. 4 GND IO1 GND 4 1 4 2 3 VCC IO2 N.C. – Not internally connected Pin Functions DRY NO. DRL NO. DRS NO. DZD NO.
PAGE 4
TPD2E001 SLLS684H – JULY 2006 – REVISED AUGUST 2014 www.ti.com 6.3 Recommended Operating Conditions over operating free-air temperature range (unless otherwise noted) MIN TA Operating free-air Temperature Range Operating Voltage VCC Pin IO1, IO2 Pins MAX UNIT –40 85 °C 0.9 5.5 V 0 VCC 6.4 Thermal Information TPD2E001 THERMAL METRIC (1) DRY DRL DRS DZD 5 PINS 5 PINS 6 PINS 4 PINS 374.2 257.6 91.9 213.7 RθJC(top) Junction-to-case (top) thermal resistance 223.4 97.6 106.9 93.
PAGE 5
TPD2E001 www.ti.com SLLS684H – JULY 2006 – REVISED AUGUST 2014 6.6 Typical Characteristics 1000 2.20 IO Leakage Current (pA) IO Capacitance (pF) 2.00 1.80 1.60 1.40 1.20 100 10 1.00 0.00 1.00 2.00 2.50 3.00 4.00 1 –40 5.00 25 Figure 1. IO Capacitance vs IO Voltage (VCC = 5 V) 65 85 Figure 2.
PAGE 6
TPD2E001 SLLS684H – JULY 2006 – REVISED AUGUST 2014 www.ti.com 7 Detailed Description 7.1 Overview The TPD2E001 is a two-channel Transient Voltage Suppressor (TVS) based Electrostatic Discharge (ESD) protection diode array. The TPD2E001 is rated to dissipate ESD strikes at the maximum level specified in the IEC 61000-4-2 Level 4 international standard. 7.2 Functional Block Diagram VCC IO2 IO1 GND 7.
PAGE 7
TPD2E001 www.ti.com SLLS684H – JULY 2006 – REVISED AUGUST 2014 8 Application and Implementation 8.1 Application Information TPD2E001 is a diode array type Transient Voltage Suppressor (TVS) which is typically used to provide a path to ground for dissipating ESD events on hi-speed signal lines between a human interface connector and a system. As the current from ESD passes through the TVS, only a small voltage drop is present across the diode. This is the voltage presented to the protected IC.
PAGE 8
TPD2E001 SLLS684H – JULY 2006 – REVISED AUGUST 2014 www.ti.com 9 Power Supply Recommendations This device is a passive ESD protection device and there is no need to power it. Care should be taken to make sure that the maximum voltage specifications for each line are not violated. 10 Layout 10.1 Layout Guidelines • • • The optimum placement is as close to the connector as possible.
PAGE 9
TPD2E001 www.ti.com SLLS684H – JULY 2006 – REVISED AUGUST 2014 11 Device and Documentation Support 11.1 Trademarks FireWire is a trademark of Apple Computer, Inc. All other trademarks are the property of their respective owners. 11.2 Electrostatic Discharge Caution These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. 11.3 Glossary SLYZ022 — TI Glossary.
PAGE 10
PACKAGE OPTION ADDENDUM www.ti.
PAGE 11
PACKAGE OPTION ADDENDUM www.ti.com 4-Feb-2015 (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line.
PAGE 12
PACKAGE MATERIALS INFORMATION www.ti.com 18-Jul-2014 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 1.78 0.69 4.0 8.0 Q3 TPD2E001DRLR SOT DRL 5 4000 180.0 8.4 1.98 TPD2E001DRSR SON DRS 6 1000 330.0 12.4 3.3 3.3 1.1 8.0 12.0 Q2 TPD2E001DRYR SON DRY 6 5000 179.0 8.4 1.2 1.65 0.7 4.0 8.
PAGE 13
PACKAGE MATERIALS INFORMATION www.ti.com 18-Jul-2014 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TPD2E001DRLR SOT DRL 5 4000 202.0 201.0 28.0 TPD2E001DRSR SON DRS 6 1000 367.0 367.0 35.0 TPD2E001DRYR SON DRY 6 5000 203.0 203.0 35.0 TPD2E001DZDR SOP DZD 4 3000 203.0 203.0 35.
PAGE 14
PAGE 15
PAGE 16
PAGE 17
PAGE 18
PAGE 19
PAGE 20
PAGE 21
PAGE 22
PAGE 23
PAGE 24
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.