Installation Instructions

ManualsBrandsTexa ManualsElectronicsDiagnosis black box

SUMMARY

1 Revision of the Manual.......................................................................................3

INTRODUCTION.....................................................................................................4

2 LEGEND OF THE SYMBOLS USED.................................................................5

3 SPECIFIC SAFETY RULES FOR INSTALLING TMD MK5 FPT.......................6

3.1 Glossary..................................................................................................................6

3.2 General Rules..........................................................................................................7

3.3 Operator Safety.......................................................................................................8

3.4 Device Safety..........................................................................................................9

3.5 Safety during the Installation.................................................................................11

4 OPERATION OF THE RADIO DEVICES.........................................................13

5 NORMATIVE INFORMATION..........................................................................14

6 TMD MK5 FPT..................................................................................................16

7 DESCRIPTION.................................................................................................17

8 TECHNICAL FEATURES.................................................................................18

9 INSTALLATION................................................................................................20

9.1 Suggestions for a Correct Installation....................................................................21

9.2 Positioning TMD MK5 FPT....................................................................................22

9.3 Power Supply Connections...................................................................................23

9.4 Checking the Installation.......................................................................................24

10 BLINK CODES...............................................................................................25

10.1 LED flashes with the Instrument panel On..........................................................25

10.2 Flashes of the Blue LED......................................................................................26

11 INDICATIONS IN CASE THE VEHICLE IS NOT USED FOR A LONG TIME

...............................................................................................................................27

12 MAINTENANCE.............................................................................................28

13 ENVIRONMENTAL INFORMATION..............................................................29

14 LEGAL NOTICES...........................................................................................30

Summary of content (30 pages)

PAGE 1
SUMMARY 1 Revision of the Manual.......................................................................................3 INTRODUCTION.....................................................................................................4 2 LEGEND OF THE SYMBOLS USED.................................................................5 3 SPECIFIC SAFETY RULES FOR INSTALLING TMD MK5 FPT.......................6 3.1 Glossary..............................................................................................
PAGE 2
PAGE 3
TMD MK5 FPT INSTALLATION MANUAL 1 Revision of the Manual This document includes the assembly instructions for the product: TMD MK5 .
PAGE 4
INTRODUCTION Dear Customer, We would like to thank you for choosing a TEXA product for your workshop. We are certain that you will get the greatest satisfaction from it and receive a great deal of help in your work. Please read through the instructions in this manual carefully and keep it for future reference. Reading and understanding the following manual will help you to avoid damage or personal injury caused by improper use of the product to which it refers. TEXA S.p.
PAGE 5
2 LEGEND OF THE SYMBOLS USED Toxic material hazard Risk of crushing hands Explosive material hazard Floor level obstacle warning Electric shock hazard Laser beam hazard Electromagnetic field hazard Low temperature danger - freezing Flammable material hazard General Risk Hot surface hazard Obligation to read the instructions Corrosive substance hazard Safety glasses required Risk of noise level above 80 dbA Protective gloves required Moving Parts Risk Disconnect mains plug from electrical ou
PAGE 6
3 SPECIFIC SAFETY RULES FOR INSTALLING TMD MK5 FPT The technology used for the design and manufacturing control of the TMD MK5 FPT makes it a reliable, simple and safe device to install and use. The personnel in charge of installing the remote diagnostic tools are required to follow the general safety rules, to use TMD MK5 FPT devices for their intended use only and to carry out the maintenance as described in this manual.
PAGE 7
3.2 General Rules The operator must have carefully read all the information and instructions in the technical documents provided with the tool. If the operator is not able to read this manual, the operating instructions and safety indications must be read and discussed in the operator's native language.
PAGE 8
3.3 Operator Safety Carefully evaluate the device's installation position. An improper installation may cause severe damage and injuries. Safety Measures: • Make sure the installation does not compromise the correct functioning of the vehicle's controls, in particular the brakes and, in general, the safety devices. The device was manufactured to be electrically safe and insulated and to work with specific supply voltage levels.
PAGE 9
3.4 Device Safety The device was manufactured to be mechanically resistant. Careless use and excessive mechanical strain may impair its efficiency. Safety Measures: Do not drop, shake or knock the device. Do not place objects over the cables nor bend them. Do not carry out any type of intervention that may damage the device. Do not open or disassemble the device. Do not fold the device's antenna. Use the device only with the antenna it is provided with or with one authorised by the device's manufacturer.
PAGE 10
The electromagnetic compatibility tests carried out on the device guarantee that it can be adapted to the technologies normally used on vehicles (e.g. engine control, ABS, airbag, etc.). Nevertheless, if malfunctions occur, contact the vehicle's dealer. In particular, the device's proper operation could be compromised by covering the antenna with shielding objects and/or materials. Such materials force the device to work with a higher power compared to what is normally required.
PAGE 11
3.5 Safety during the Installation The installation of the device was carefully tested by qualified personnel in TEXA. You must follow some indications provided by the vehicle manufacturer in order to install the device correctly. Safety Measures: • Follow the indications provided in the vehicle's manual carefully to disassemble the plastic parts and the access to the compartments.
PAGE 12
• Do not spread out the wiring with the cables stretched. • Do not spread out the wiring in walkable areas or in areas that are subject to friction without the necessary protections; • For the installation you must use only the wiring and the components provided with the device. • Put the antenna at a minimum distance of 20 cm from the positions of the vehicle's passengers. At the end of the installation, you must restore the initial conditions of the vehicle.
PAGE 13
4 OPERATION OF THE RADIO DEVICES Wireless connection with Bluetooth and LTE technology The wireless connectivity with the Bluetooth and LTE technology is a technology that supplies a standard, reliable method to exchange information between different devices, using radio waves. Other than TEXA tools, many products use this technology, such as mobile phones, portable devices, Computers, printers, cameras, Pocket PCs, etc.
PAGE 14
5 NORMATIVE INFORMATION Simplified EU Declaration of Conformity The manufacturer, TEXA S.p.A., declares that the type of TMD MK5 FPT radio equipment is compliant with the following directives: • RED 2014/53/UE The complete text of the EU declaration of conformity is available at the following Internet address http://www.texa.it/download. A minimum separation distance of 20 cm is required; it must be supported by the installation and operating configurations of the transmitter and of the related antenna/s.
PAGE 15
PAGE 16
6 TMD MK5 FPT TMD MK5 FPT is a GPS tracking device able to communicate via Bluetooth with other diagnostic devices. The TMD MK5 FPT Kit includes: • TMD MK5 FPT. • Wiring for the electrical connection. • Installation manual.
PAGE 17
7 DESCRIPTION 1. Fixing hole 2. L1 - Accessory and power connector 3. LED: a) red LED b) Blue LED c) green LED 4. USB device connector 5. Fixing hole 6. Fixing hole To install additional devices, consult the user and installation manual provided in the packages of the individual devices.
PAGE 18
8 TECHNICAL FEATURES Manufacturer: TEXA S.p.A. Brand: FPT Model: TMD MK5 FPT CPU: AM3352 CORTEX A8 RAM: 256 MB FLASH: 256 MB GPRS module: GPRS 2G and CAT-M1 GPS module: GPS, GLONASS, Galileo and QZSS module Interfaces: service device type USB 2.0, BT 4.2, LIN bus Sensors: 16 g sensor, barometric, gyroscope Operating System: Linux Battery: 3.
PAGE 19
ECE / ONU R10 Regulations and Directives: RED 2014/53/EU RoHS 2011/65/EU ETSI EN 301-489-1 ETSI EN 301-489-19 Electromagnetic Compatibility: ETSI EN 301-489-52 ETSI EN 301-489-17 ISO 7637-1 ISO 7637-2 ETSI EN 300 328 ETSI EN 301 511 Radio Systems: ETSI EN 303 413 ETSI EN 301 908-13 EN 62311 Electrical Safety: EN 62368 19
PAGE 20
9 INSTALLATION The following chapters describe the device's installation phases. Please read this manual thoroughly before proceeding with the installation. The installation must be performed by qualified personnel only. The installation must be carried out following the indications provided in the specific installation sheet for the vehicle you are working on. For the installation you need: • Scissors and a wire stripper. • Flat-tip and Phillips screwdriver (medium).
PAGE 21
9.1 Suggestions for a Correct Installation When choosing the most suitable place to locate the device, you must consider the distance betweenTMD MK5 FPT and any external diagnostic device. Consider that the coverage range of the devices equipped with Bluetooth technology inside the vehicle's passenger compartment is approximately 3 metres.
PAGE 22
9.2 Positioning TMD MK5 FPT Once you have located the connection points to the power supply lines, you must find the most suitable place to fasten the device.
PAGE 23
9.3 Power Supply Connections To power TMD MK5 FPT use the specific cable provided (code 3903929) with the device. Do not connect the connector to TMD MK5 FPT until the entire system is completed. Use the cable with the loose wires. Proceed as follows: 1. Identify the red wire (+30 VBatt.), the yellow wire (15, ignition terminal) and the black wire (ground). 2. Draw power for the +30 VBatt line directly from the vehicle's battery.
PAGE 24
9.4 Checking the Installation Once you have completed all the operations described in the previous chapters, you must make sure the installation has been carried out correctly. Proceed as follows: 1. Connect the TMD MK5 FPT power supply connector and turn the vehicle ignition key to the “ON” position. 2. Wait for the red LED on the TMD MK5 FPT to start flashing. If the LED does not turn on, proceed as follows: 1. Disconnect the power cable from TMD MK5 FPT. 2. Wait 5 seconds. 3. Reconnect the power cable.
PAGE 25
10 BLINK CODES The device uses the flashing of the LEDs to indicate its status. The status LEDs are: green, red and blue and can flash with different frequencies. 10.1 LED flashes with the Instrument panel On During normal operating conditions, when the device must connecting to the server to send the data, the notifications are given through a continuous cycle of 3 flashes. Each series of flashings is approximately 2 s after the previous one. The three flashings indicate respectively the status of: 1.
PAGE 26
10.2 Flashes of the Blue LED Below is the explanation regarding the correct reading of the flashes of the blue LED: LED Status Off Blue On No Bluetooth communication. -- Flashing Device in communication via Bluetooth.
PAGE 27
11 INDICATIONS IN CASE THE VEHICLE IS NOT USED FOR A LONG TIME The correct functioning of TMD MK5 FPT as geolocaliser requires the device to be constantly powered even when the vehicle is stationary, the engine is off and the ignition key is not inserted. In these conditions TMD MK5 FPT continues to absorb current from the vehicle's battery.
PAGE 28
12 MAINTENANCE In order to guarantee a correct functioning of TMD MK5 FPT and of the accessories connected to it, you must perform regular checks on the device. We remind the operator to carry out the tests with the utmost care, making sure he/she is working in total safety during all of the steps (see General Rules for the Safety of Operators in this manual, also). Maintenance interventions must be performed within 15 days from the installation of TMD MK5 FPT and then every 6 months.
PAGE 29
13 ENVIRONMENTAL INFORMATION Do not dispose of this product with other undifferentiated solid waste. For information regarding the disposal of this product please see the pamphlet supplied.
PAGE 30
14 LEGAL NOTICES TEXA S.p.A. Via 1 Maggio, 9 - 31050 Monastier di Treviso - ITALY Tax Code - Company Register of Treviso ID No. - VAT No.: 02413550266 Single-shareholder company subject to the direction and coordination activities of Opera Holding S.r.l. Paid-up share capital 1,000,000 € - R.E.A. (Economic Administrative Index) No. 208102 Legal Representative Bruno Vianello Phone +39 0422.791.311 Fax +39 0422.791.300 www.texa.