Introduction.................................................................................................. 2 General Rules for the Operator's Safety .................................................... 5 Functioning of the Equipment Radio Devices ........................................... 9 Warning ...................................................................................................... 10 Information about Regulations .................................................................
Introduction Dear Mechanic, We would like to thank you for choosing our tool for your garage. We are sure that you will obtain the greatest satisfaction and a significant help from it in your work. Please read carefully the instructions included in this operation manual, and keep it in a safe, handy place for future reference.
This manual illustrates and describes both standard and optional features. Therefore, the tool you purchase might not feature some of the functions or components described herein. This manual should be considered as part of the tool it refers to. If you transfer the tool to a third party, please include the manual as well.
! DANGER It indicates a potential hazard which, if not avoided, might cause serious injuries or death. ! WARNING It indicates a potential hazard which, if not avoided, might cause mild or limited damage and injuries. WARNING Without alarm symbol, it indicates a potential hazard which, if not avoided, might cause mild or limited damage and injuries. HIGH VOLTAGE It indicates general hazardous conditions connected to the presence of dangerous energy sources which could cause burns and shocks.
General Rules for the Operator's Safety This product was designed and developed to be used by specializing technical personnel in the field of automotive, such as electricians, mechanics, technicians and engineers specializing in automotive. Never allow this equipment to be used by unqualified personnel in order to prevent personal injuries and damage to the tool or to the electronic system of the motorcycle the tool is connected to.
WARNING 6. Do not drop, hit or shake the unit, as this might damage irreparably its internal circuits. Do not use corrosive chemicals, solvents or aggressive detergents to use NAVIGATOR TXB. Work Environment ! DANGER The workplace shall be dry, with sufficient light and proper air circulation. In particular, the diagnostic operations required to start the engine shall be carried out in facilities equipped with exhaust gas system.
Handle portable lamps with care and use only those with metal protection. Wear safety goggles to protect your eyes from gasoline, dust and metals. It is necessary to remember that the catalytic converter reaches an extremely high temperature, able to cause serious burns and to start a fire. - Therefore, pay attention that no oil drippings, rags, paper or other inflammable materials are close to the catalytic converter.
Functioning of the Equipment Radio Devices WARNING Place the unit so as to ensure the correct functioning of the radio devices contained in it. In particular, do not cover it with shielding materials or metal in general, and do not place it inside the trunk, engine bay or glove compartment; if you place it inside the passenger compartment, make sure that the vehicle's windows are not shielded. MT_Navigator_TXB_EN_00 Texa S.p.a.
Functioning of the Equipment Radio Devices WARNING Wireless connection with Bluetooth technology, Wi-Fi and GPRS The Wireless connection with Bluetooth technology, Wi-Fi and GPRS, is a technology providing a standard and safe method to exchange data between different devices using radio waves. Besides Texa's tools, other products use this technology, such as: mobile phones, laptops, computers, printers, cameras, pocket PC's, etc.
Warning The use of Texa Software is subject to the acceptance of the following conditions: 1. Liability The customer is responsible of the use of any tool and software application provided by TEXA S.p.A. and sold by the dealer. The customer accepts to indemnify and hold harmless TEXA S.p.A.
A) Lease, sub-license, lend, copy, modify, reproduce, translate, redesign, decompile, disassemble the licensed software and the information contained in it. B) Transmit by wire or over the air, or by any other means the software, in whole or in part. C) Create works or derive other works, partly or entirely on the basis of the software or of the information contained in it, or on information associated to it.
model names and descriptions as well as the relating specifications may differ from the ones listed and proposed in the programs and tools this manual refers to. The warranty does not cover problems possibly arising from software conflicts if the software is installed on hardware platforms other than those manufactured by Texa S.p.A. (e.g., commercial personal computers, pocket PCs, tablet PCs).
Information about Regulations Declaration of compliance Texa S.p.A. hereby declares that this unit complies with the basic requirements and other relevant provisions set out by Directive 1999/5/EC. A copy of the full-length Declaration of Conformity is available at Texa S.p.A., Via 1 Maggio 9, 31050 Monastier di Treviso (TV), Italy Antenna This product was designed and tested for the use with the antenna provided.
Environmental Information (European Union) This product contains substances which could be hazardous for the environment and human health if not properly disposed of. We are therefore providing you with the following information to prevent such substances from being released and to improve the use of natural resources. Electric and electronic equipment shall not be disposed of together with ordinary urban waste, but shall be taken to separate collection facilities for their correct treatment.
For a Correct Use of NAVIGATOR TXB In order to use your NAVIGATOR TXB correctly, it is necessary to heed the following rules: - - The unit shall be placed in a dry environment, avoiding its exposure or use near heat sources. Do not hit the NAVIGATOR TXB Central Unit. Do not wet the NAVIGATOR TXB Central Unit with water or other liquids. Do not place any objects on the cables, and do not bend the cables.
1 DESCRIPTION OF NAVIGATOR TXB Navigator TXB acts as an active interface between the motorcycle undergoing diagnosis and processing and displaying units such as: Axone Line, Multipegaso, PCs and hand-held computers. Once NAVIGATOR TXB is connected to the motorcycle's control unit through the cable as instructed by the operating program, it is possible to connect to the processing/displaying central unit through a Bluetooth wireless connection or USB cable.
1.1 Tool Overview 1 2 6 3 7 8 4 5 1. 2. 3. 4. 5. 6. 7. 8. Green LED - Supply: On, it indicates that the tool is supplied; Flashing, it indicates communication with the motorcycle's control unit. Red LED - USB Communication Status: it indicates the USB communication status. Blue LED - Blootooth Communication Status: it indicates the Bluetooth communication status. USB Device: for the connection to the display unit.
(*) Updates will require a specific assistance cable which is not included. MT_Navigator_TXB_EN_00 Texa S.p.a.
2 HOW TO SUPPLY NAVIGATOR TXB NAVIGATOR TXB can be supplied: 1. Through the connection of the diagnostic port of the motorcycle under examination 2. Through the auxiliary cable, for direct connection to the battery. If the tool is connected correctly, the green LED will turn on. NOTE: Since NAVIGATOR TXB does not have an internal battery, it is advisable to make sure that the tool is correctly supplied.
3 HOW TO CONNECT TO THE MOTORCYCLE WARNING In order to connect to the motorcycle's control unit, it is necessary to have the special termination cables contained in the suitcases Bike Standard Cables and Bike Optional Cables To connect to the motorcycle, it is first of all necessary to locate the control unit's connector on the basis of the information (picture or movie) provided by the operating program in use. The location and type of connector on the motorcycle varies depending on make and model.
4 CONNECTION TO (Communication Type) THE DISPLAY UNIT 4.1 Bluetooth Communication If connecting cables are not plugged in the USB Device connector, the communication directly occurs in Bluetooth mode. Simply select this communication mode in the program installed in the displaying unit (Axone Series/Multipegaso tools, PCs, etc.) 4.2 USB Communication An optional communication mode is the one providing the use of a cable for the connection to a USB port of the PC or any other displaying unit.
5 TECHNICAL FEATURES • Main Processor: INTEL PXA255 400MHz, • Internal memory: 64 Mb SDRAM, 64 Mb FLASH • External power supply: 8 ÷ 16 Volt • 12V Consumption: 0.25 A typical • Power supply connector: from 4-pole power mini-din, or from diagnosis cable. • USB Connections: 1 USB 2.0 Device connection, 1 USB 2.0 Host connection, with possibility of SW update by means of USB storage pen. • Wireless connection to PC: Bluetooth 2.
