Introduction.................................................................................................. 2 General Rules for the Operator's Safety .................................................... 5 Functioning of the Equipment Radio Devices ........................................... 9 Warning ...................................................................................................... 10 Information about Regulations .................................................................
Introduction Dear Mechanic, We would like to thank you for choosing our tool for your garage. We are sure that you will obtain the greatest satisfaction and a significant help from it in your work. Please read carefully the instructions included in this operation manual, and keep it in a safe, handy place for future reference.
This manual illustrates and describes both standard and optional features. Therefore, the tool you purchase might not feature some of the functions or components described herein. This manual should be considered as part of the tool it refers to. If you transfer the tool to a third party, please include the manual as well.
! DANGER It indicates a potential hazard which, if not avoided, might cause serious or fatal injuries. ! WARNING It indicates a potential hazard which, if not avoided, might cause mild or limited damage and injuries. WARNING Without alarm symbol, it indicates a potential hazard which, if not avoided, might cause mild or limited damage. HIGH VOLTAGE It indicates general hazardous conditions connected to the presence of dangerous energy sources which could cause burns and shock.
General Rules for the Operator's Safety This product was designed and developed to be used by specializing technical personnel in the field of automotive, such as electricians, mechanics, technicians and engineers specializing in automotive. Never allow this equipment to be used by unqualified personnel in order to prevent personal injuries and damage to the tool or to the electronic system of the vehicle the tool is connected to. The workplace shall be dry, with sufficient light and proper air circulation.
WARNING 6. Do not open the NAVIGATOR TXT device. Any operations carried out by unqualified personnel might damage the device itself. WARNING 7. Do not drop, hit or shake the unit, as this might damage irreparably its internal circuits. Do not use corrosive chemicals, solvents or aggressive detergents to use NAVIGATOR TXT. MT_NAVIGATOR_TXT_EN_00 Texa S.p.a.
Work Environment ! DANGER The workplace shall be dry, with sufficient light and proper air circulation. In particular, the diagnostic operations required to start the engine shall be carried out in facilities equipped with exhaust gas system. We remind you that inhaling carbon monoxide (which is odourless) may cause serious body injuries. When operating on engines or other parts of vehicles remember the following: ! - - - - DANGER Wear suitable clothing and keep a behaviour fit to prevent accidents.
It is necessary to remember that the catalytic converter reaches an extremely high temperature, able to cause serious burns and start a fire. - Therefore, pay attention that no oil drippings, rags, paper or other inflammable materials are close to the catalytic converter. When you work on the batteries, it is necessary to remember that: ! DANGER Car batteries contain sulphuric acid, and produce explosive gas. Therefore, it is necessary to heed the following instructions: Always wear protective goggles.
Functioning of the Equipment Radio Devices WARNING Wireless connection with Bluetooth technology, Wi-Fi and GPRS The Wireless connection with Bluetooth technology, Wi-Fi and GPRS, is a technology providing a standard and safe method to exchange data between different devices using radio wave. Besides Texa's tools, other products use this technology, such as: mobile phones, portable phones, computers, printers, cameras, pocket PC's, etc.
Warning Use of Texa Software for Pocket PC is subject to the acceptance of the following conditions: 1. Liability The customer is responsible of the use of any tool and software application provided by TEXA S.p.A. and sold by the dealer. The customer accepts to idemnify and hold harmless TEXA S.p.A.
A) Lease, sub-license, lend, copy, modify, reproduce, translate, redesign, decompile, disassemble the licensed software and the information contained in it. B) Transmit by wire or over the air, or by any other means the software, in whole or part. C) Create works or derive other works, partly or entirely on the basis of the software or of the information contained in it, or on information associated to it.
names and descriptions as well are the relating specifications may differ from the ones listed and proposed in the programs and tools this manual refers to. The warranty does not cover problems possibly arising from software conflicts if the software is installed on hardware platforms other than those manufactured by Texa S.p.A. (e.g., commercial personal computers, pocket PCs, tablet PCs).
Information about Regulations Declaration of compliance Texa S.p.A. hereby declares that this unit complies with the basic requirements and other relevant provisions set out by Directive 1999/5/EC. A copy of the full-length Declaration of Conformity is available at Texa S.p.A., Via 1 Maggio 9, 31050 Monastier di Treviso (TV), Italy Antenna This product was designed and tested for use with the antenna provided.
Environmental Information (European Union) This product contains substances which could be hazardous for the environment and human health if not properly disposed of. We are therefore providing you with the following information to prevent such substances from being released and to improve the use of natural resources. Electric and electronic equipment shall not be disposed of together with ordinary urban waste, but shall be taken to separate collection facilities for correct treatment.
For a Correct Use of NAVIGATOR TXT In order to use your NAVIGATOR TXT correctly, it is necessary to heed the following rules: - - The unit shall be placed in a dry environment, avoiding its exposure or use near heat sources. Do not hit the NAVIGATOR TXT Central Unit. Do not wet the NAVIGATOR TXT Central Unit with water or other liquids. Do not place any objects on the cables, and do not bend the cables.
1 DESCRIPTION OF NAVIGATOR TXT Navigator TXT acts as an active interface between the vehicle undergoing diagnosis and the processing and displaying units, such as: Axone Series, Multipegaso, PCs and Palmtop computers. Once NAVIGATOR TXT is connected to the vehicle's control unit through the cable indicated by the operating program, it is possible to connect to the processing/displaying central unit through a Bluetooth wireless connection or USB cable.
1.1 Tool Overview 1 6 2 7 3 8 4 5 Figure 1 1. 2. 3. 4. 5. 6. 7. 8. Green LED - Supply: On, it indicates that the tool is supplied; Flashing, it indicates communication with the motorcycle's control unit. Red LED - USB Communication Status: it indicates the USB communication status. Blue LED - Blootooth Communication Status: it indicates the Bluetooth communication status. USB Host: for inputting the protection key and/or service or updating operations (*).
2 HOW TO SUPPLY NAVIGATOR TXT NAVIGATOR TXT can be supplied: 1. Through the connection of the diagnostic port of the vehicle under examination. 2. Through the auxiliary cable, for direct connection to the battery. If the tool is connected correctly, the green LED will turn on. NOTE: Since NAVIGATOR TXT does not have an internal battery, it is advisable to make sure that the tool is correctly supplied.
WARNING When connecting the cable clamps to the battery terminal, pay attention to the polarity. A LED on the cable turning on indicates presence of power supply. 2.2.2 Cigar Lighter Cable This cable allows to connect to the cigar lighter socket to supply TXT. The location of the port on the vehicles varies depending on the make and model. The turning on of a LED on the cable indicates the presence of power supply.
3 HOW TO CONNECT TO THE VEHICLE To connect to the vehicle, first of all it is necessary to locate the control unit's connector on the basis of the information (pictures or movie) provided by the operating program in use. The location and type of connector on the vehicles vary depending on make and model. For this reason, the program provides all the necessary information. WARNING Strictly heed the instructions provided by the program.
4 CONNECTION TO (Communication Type) THE DISPLAY UNIT 4.1 Bluetooth Communication If cables are not plugged in the USB Device connector, communication directly occurs in Bluetooth mode. Simply select and activate this communication mode in the program installed on the displaying palmtop. 4.2 USB Communication An optional communication mode is the one providing for using a cable for the connection to a USB port of the palmtop computer, if existing.
5 TECHNICAL FEATURES OF TXT • Main Processor: INTEL PXA255 400MHz, • Internal memory: 64 Mb SDRAM, 64 Mb FLASH • • • • External power supply: 8 ÷ 32 Volt 12V Consumption: 0.25 A typical 24V Consumption: 0.18 A typical Power supply connector: 4-pole power mini-din • USB Connections: 1 USB 2.0 Device connection, 1 USB 2.0 Host connection, with possibility of SW update by means of USB storage pen. • Wireless connection to PC: Bluetooth 2.