Technical description and operating instructions gb was here Concept E 100 Control
Technical specifications and operating instructions Concept E 100 / 200/ 300 /400 PC/multimedia/home cinema speaker systems with integrated 5.
For your information The information in this document may be changed without advance notification and does not represent any obligation on the part of Lautsprecher Teufel GmbH. No part of these operating instructions may be copied in any way, or transferred in any form, whether electronically, mechanically, as photocopies or recordings, without the prior written consent of Lautsprecher Teufel GmbH. © Lautsprecher Teufel GmbH Version 1.
Safety information Please read the following safety information carefully. Important: please read through these operating instructions very carefully. It is essential that you take note of all of the safety information and operating instructions before switching on the appliance. Please keep these operating instructions in a safe place for future reference. fective cable must be replaced. Essential: please read the operating instructions.
Introduction to the Concept E 100 · 200 · 300 · 400 Dear Customer, Thank you for purchasing the Concept E System. With this speaker set from Teufel, you have chosen an elegant and powerful multimedia home entertainment system that, despite its compact dimensions, delivers excellent sound quality. This speaker set can be operated either with a a PC or DVD player with decoder.
Unpacking • Contents• Assembly First please check that all system components are included. Unpacking Fold back the flaps on the top of the box, remove the polystyrene packaging and carefully lift each loudspeaker out of the box. All Concept E sets are supplied as a complete system.
Optional accessories (selection) Accessories Because all customers have different requirements, Concept E systems are supplied without connecting cables, wall mounts or bases. We recommend the following articles:* Teufel speaker cable 2 x 2.5 mm2 The highly flexible, unilaterally marked OFC cable has sufficient diameter to ensure unhindered bridging up to 15 meters. The white casing is inconspicuous, and is offered as a cable roll in two lengths: 15 or 30 meters.
Set-up: PC system * Concept E 100/200/300/400 Because the satellite speakers are identical, you can position them any way you like and »designate« one of the five as the centre speaker. * Concept E 300/400 We often recommend positioning the speakers in a diagonal setup on a larger base, and using the cloth cover with the Teufel logo on the side (also supplied).
Set-up: Home cinema system Setting up a home cinema system When using the Teufel set as a home cinema system we recommended focussing on the section of the room where the TV and seats are positioned. It is useful to position the monitor as centrally as possible, from the perspective of the viewer/ listener. Because the centre plays back spoken dialogue, this speaker must be positioned as centrally as possible under or over the TV and inclined or angled towards the listener.
Connection: Satellites Connecting the satellites To do this, cut the cable to the required lengths. Strip the plastic coating from the ends of the speaker cables (as shown). The speakers and amplifier have corresponding [+] and [–] terminals. The [+] cable of the speaker cable is marked accordingly.
Connection: 5.1 sound card Connecting to a 5.1 sound card The Concept E 100/200/300/400 systems are perfect for using with any computer. If your sound card is set up for 5.1 operation, it will usually have three 3.5mm mini-jack outputs. Connect these to the inputs using three cables (3.5 mm stereo minijacks to 2 x cinch) for the front R/L, rear R/L, centre and subwoofer positioned on the back of the Concept E subwoofer.
Connection: DVD player/recorder · Decoderstation Connection to a DVD player/recorder As well as being connected directly to your PC, the Concept E 100/200/300/400 can also be connected straight to a DVD player/recorder. It allows you to create a complete home cinema sound system with just two audio appliances! To control the set directly via a DVD player, the player/recorder must have an integrated Dolby Digital/DTS decoder.
Connection: Stereo sources Connection to stereo sources Stereo sound card, notebook, MP3 player, satellite receiver, TV set, games console, CD player, DJ mixer, Discman, Walkman, etc … You can see just how versatile the Concept E series speakers are. The speaker system can be operated successfully with any of the above appliances. And not just in stereo, but also with virtual surround sound, using the integrated “upmix” function that involves all six of the Concept E speakers.
Operating elements: Subwoofer Q Explanation of symbols Q W Q Speaker Out The arrow-headed lightning symbol in an equilateral triangle indicates the presence of a dangerous non-insulated electrical voltage within the system housing and therefore a risk of electrical shock.
Start-up Start-up Switch the rear mains switch E to »On« to activate the 5.1 amplifier. E Power On Volume Turn the »Volume« dial to control the overall volume of the 5.1 amplifier. Bass Standby Volume Please note If you are going to be away or if the 5.1 amplifier is not going to be used for a long period of time turn the mains switch E to »Off«. Off Min · The ring encircling the round »Standby« button on the front of the woofer lights up »red«.
Troubleshooting The subwoofer is buzzing, what can I do? These buzzing noises may be produced by connected devices or interference in the power supply. Please perform the following test to help determine the cause of the buzzing. 1. Disconnect all cinch cables from the subwoofer’s input jacks. If this eliminates the buzzing noise, please proceed to step B. Otherwise, start with step A. A. Connect the subwoofer’s power cable to a different power circuit (e.g. kitchen or bedroom).
Troubleshooting »The subwoofer does not work when connected to stereo sources, e.g. audio CDs (on PC/DVD player)« The Concept E is purely a replay system – it does not have a built-in decoder function. Therefore it is »dependent« on the allocation of the external decoders when splitting the signals. This decoder is a component of the sound card, DVD player or decoder station software.
Technical description and operating instructions ControlStation 2 Control Unit for PC Speaker Systems
Contents General notes and information ......................................................................................................................................3 Proper use..................................................................................................................................................... 3 Safety notes ..................................................................................................................................................................
General notes and information Notice The information in this document may be changed without prior notice and in no way constitutes any liability on the part of Lautsprecher Teufel GmbH. No part of these instructions may be reproduced in any form or be broadcasted in any way electronically, mechanically, by photocopy or recording without the written permission of Lautsprecher Teufel GmbH. © Lautsprecher Teufel GmbH Version 1.
Safety notes Caution icons You will find the following caution icons used in these instructions: Danger High risk! Failure to observe the warning may result in severe personal injury or death Attention Moderate risk! Failure to observe the warning may result in property damage. Minor risk! Points which should be observed when handling the unit. Safety notes Danger Risk of electric shock! Faulty installation of electrical equipment or mains voltage which is too high can cause electric shocks.
Danger Danger of injury/damage! Incorrect location may result in damage. • Never use the unit unmounted in vehicles, in instable locations, on wobbly stands or furniture, with attachment fixtures that are too small etc. The unit could topple over or fall, injuring persons or causing damage to the unit itself. • Arrange the device so that it cannot be knocked over accidentally and make sure that the cables do not pose a trip hazard. • Do not place the unit near sources of heat (e. g.
Control elements and connections Front side 1 Pos Name 2 3 4 5 6 7 8 9 Standby Phones Mute + Source Mic Pure – Description Pos Name 1 Standby On/Standby button 2 Source Select an audio source 3 Phones Earphone connection 4 Mic 5 — Description 6 Mute Muting 7 Pure Switch between stereo (2.0) or 5.
Remote control Pos Name Description 18 Mute 24 18 Control the display panel brightness 23 20 21 Increase the volume 22 21 22 Reduce the volume 19 20 23 Aux 1, Aux 2, Select an audio source Aux 3 Dimmer Pure 19 Switch between stereo (2.0) or 5.1 upmix On/Standby button 24 Setup and connection Setup location • Select a stable, level base. • Make sure that the environment is clean and free from dust. • Avoid placing the unit close to sources of heat or in direct sunlight.
Remote control A 3-volt button cell, type CR2025, is used to power the remote control. Upon delivery, this button cell is already in the remote control and is secured by a plastic strip. The strip is visible on the back of the remote control. Just carefully pull it out. The remote control is now ready for use. Changing the batteries • Hold the remote control with the bottom facing up. • Press the bar on the A battery compartment to the middle (A) and pull out the compartment (B).
Selecting a source After turning the unit on, the last audio source is selected. • You can switch the source with the button 2 “Source” and/or the buttons 19 “Aux 1”, “Aux 2”, and “Aux 3”. The selected source is shown on the display panel 5. 2 5 7 Standby Phones Mute + Source Mic Pure – Pure mode The stereo signal of the sources Aux 2 and Aux 3 In is normally converted to a 5.1 signal (“Upmix”). With the button 7 “Pure” you can turn this conversion on or off.
Care and cleaning Clean your ControlStation 2 regularly with a soft, slightly damp microfibre cloth. Please note the following carefully: Attention Risk of damage! In contact with live parts, water can lead to electric shock or short circuit. • Ensure that no liquid penetrates the unit. • Pull the wall adapter out of the socket before cleaning. Attention Risk of damage! Using the wrong cleaning materials may damage the delicate surface of the case.
Technical data Power consumption, max: Operating voltage of the wall adapter: Operating voltage of the unit: 10 W 100–240 V~ / 50/60 Hz 12 V DC, 1 A Inputs: 1x 5.1 audio (RCA jacks) 2x stereo (RCA jacks) 1x microphone 3.5 mm mini jack Outputs: 1x 5.1 audio (RCA jacks) 1x headphones 3.5 mm mini jack 1x microphone 3.
For questions, suggestions or criticism please contact our customer service department: Lautsprecher Teufel GmbH Gewerbehof Buelowbogen - Aufgang D1 10783 Berlin (Germany), Buelowstr. 66 Tel.: +49 (0)30 - 300 930 0 Fax: +49 (0)30 - 300 930 930 www.teufel.eu No liability is accepted for the accuracy of this information. Technical changes, typographical errors and other errors reserved. Instruction No.