Installation Manual

1) Slip the loop from one side of your TetherTies over the end

of the adapter, cable, or other item you’d like to secure.

3) Slip the loop from the other side of your TetherTies over

the end of the second item which you’d like to secure.

2) Slide the metal ring sleeve up tight on the adapter (or other item),

and crimp the metal sleeve securely using the enclosed crimping tool.

4) Slide the metal ring sleeve up tight on the second item, and crimp

the metal sleeve securely using the enclosed crimping tool.

NOTE: (On steps #2 and #4) Be sure to use a firm grip with the enclosed crimping tool to fully crimp the metal sleeve.

*For larger installations or to get greater leverage when crimping metal sleeves, linesman pliers serve as a good alternative to the enclosed

crimping tool.

If you have any questions, please send us an email at support@tetherties.com, and we’d be happy to help. Visit us: www.tetherties.com

INSTALLATION GUIDE: Thank you for your purchase of TetherTies™. We

think you’ll find them useful, and your colleagues will appreciate having

adapters and computer peripherals close at hand. To install TetherTies,

please follow the steps below:

PAGE 1
INSTALLATION GUIDE: Thank you for your purchase of TetherTies™. We think you’ll find them useful, and your colleagues will appreciate having adapters and computer peripherals close at hand. To install TetherTies, please follow the steps below: 1) Slip the loop from one side of your TetherTies over the end of the adapter, cable, or other item you’d like to secure. 2) Slide the metal ring sleeve up tight on the adapter (or other item), and crimp the metal sleeve securely using the enclosed crimping tool.