AIR DIRECT Wireless Camera Shooting System User's Manual
Cat al ogue Chapter 1 Product Introduction .................................................................................................................................4 1.1 Packing list ..................................................................................................................................................4 1.2 Overview ......................................................................................................................................................
5.2.2 Battery LED ......................................................................................................................................18 Warning. .....................................................................................................................................................................
Chapter 1 Product Introduction 1.1 Packing list No. 1 2 3 4 Content AIR DIRECT Type-C Data Cable ➢ Type-C To Type-C ➢ Type-C To USB3.
1.2 Overview DC Jack Battery Hot Shoe 2.4G/5.
Battery LED The green LED indicates that the battery exceeds 1/2 power or DC IN. The yellow LED indicates that the battery is 1/4~1/2 power. The red LED indicates that the battery is 1/8~1/4 power. The red LED flicker indicates that the battery is lower than 1/8 battery. Wi-Fi LED After the power is turned on for 10 seconds, the blue LED is on and flashes for 5 seconds in High-speed, then flashes for 10 seconds in Low-speed and then lights up continuously, indicating that Wi-FI is booting normally.
Chapter 2 Getting Started 2.1 Install battery Get the battery from the packing list and find the triangular arrow mark indicating the direction of the battery. Push the battery into the AIR DIRECT battery compartment in the direction of the arrow as shown below. Battery 2.2 Power on Turn the power switch OFF->ON, the battery LED will be light on according to the current battery level.
2.3.2 Get AIR DIRECT software You need to install AIR DIRECT software on your computer. AIR DIRECT software supports Windows and Mac OS. 1. Access the following URL on your computer's browser: http://www.xxx.com/download 2. Follow the prompts to install AIR DIRECT software on your computer. 3. Connect to AIR DIRECT's built-in Wi-Fi hotspot While the Wi-Fi LED is constantly lit, you can search for and connect to AIR DIRECT's Wi-Fi hotspot on your computer, starting with "AIR_DIRECT". 4.
2.4.2 APP/USB mode switch The APP/USB mode switch can switch the system working mode. When the switch is moved to the APP side, the system works in the APP connection mode. You can connect and control the camera through the provided software APP. When going to the USB side, the system works in wireless USB transfer mode, you can connect to the camera through software such as Capture One. 2.5 DC power supply AIR DIRECT supports direct power supply from DC IN(5V).
Chapter 3 APP Use 【Connect and install the APP】 When connecting, please connect the camera and AIR DIRECT with the Type-C data cable in the package list, then turn on the power of the camera and AIR DIRECT, and switch the APP/USB button to APP mode. In the Android application market, search for "Case Remote" and install the Case Remote APP.
3.1 Remote shooting You can remotely control camera and shoot with your phone, tablet, computer, etc. 3.1.1 Live view Open the live view by clicking the Live View button in the lower right corner of the screen. LiveView Button 3.1.2 Parameter settings The top of the screen can be set to the camera: gear, shutter, aperture, ISO, EV value. Note: The camera that adjusts the gear position via the physical knob cannot adjust the gear via the APP. Click to set: gear position, shutter, aperture, ISO, EV 3.
Browse Photos Reflesh Image List If the camera continues to take pictures, the image list will automatically refresh. View large image Click on the thumbnail to view the larger image. After opening the large image, you can: ⚫ Share this photo ⚫ Save the original image to the phone ⚫ Delete this photo ⚫ View the EXIF information of this photo Share and save Click the "Select" button at the top right to select the photo. ⚫ Click the “Share” button at the bottom right to pop up a list of options.
Share photo Save photo 1 Batch deletion In the picture list mode, select the photo you want to operate and select "Delete" button, The selected photo can be deleted and the photos in the camera will be deleted too. Delete photo Save photo Select all Select All Click the "Select All" button to select all photos.
Chapter 4 Online Shooting with Camera 4.1 Connection When connecting, please connect the camera and AIR DIRECT with the Type-C cable in the package list, then turn on the camera and AIR DIRECT, and switch the APP/USB button to USB transfer mode. 4.2 Open VirtualHere service Open the VirtualHere software folder and double-click "vhui64.exe" to start the VirtualHere shooting service. After the VirtualHere service is enabled, you can remotely control the camera using software such as Capture One.
Chapter 5 Cautions and FAQ 5.1 Cautions 5.1.1 Battery Charging 1. Please charge before use for the first time or after long-term idle. The charging requirement of the charger is 5V-1A. Regular mobile phone chargers such as iPhone charger can be used. 2. AIR DIRECT's operating environment temperature is -20~50 degrees. Lower ambient temperature may cause battery performance to drop. 3.
5.1.3 RF information 1. Operation Frequency:2412-2462MHz(802.11b/g/ht20),2422-2452MHz(802.11ht40),5725-5850MHz 2. Max. Output Power 2.4G Band - 23.96dBm(802.11b/g/ht20/ht40) 5.8G Band - 5725-5850 MHz:13.
5.2 FAQ 5.2.1 DC input AIR DIRECT's DC input requirement is 5V/2A. Using a DC power supply below 5V/2A to access AIR DIRECT will cause the system to restart abnormally. 5.2.2 Battery LED When Wi-Fi is startup, it is normal for the battery LED to change color due to load changes.
Warning. The working temperature for the CamFi is -20~50 Celsius degree and the relatively humidity is 0%~95%. Low temperature may cause degradation to the battery. Keep AIR DIRECT from high temperature, moisture and water. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.