0 11 www.testo.com 5 12 7 6 180° g 0572 3350 1 x 256.000 69 x 80 x 29 8 9 0572 3330 4 x 64.000 80mm 180g 4xAA AlMn Mignon 2,5 - 5 year T< -10 °C 0515 0572 0572 3340 2 x 128.000 0572 3320 4 x 16.000 0554 1106 ! °C - + ! - + IP 67 -40°C...+50°C (UltraRange/ WLAN) IP 42 (LAN / POE) PC / PET ABS+PC +10%GF -40°C...
Testo - Information Safety Environment Cleaning Storage
Contents Contents 1 2 3 4 5 6 7 8 9 About this document ............................................................................ 5 General safety instructions ................................................................... 6 Disposal ............................................................................................... 8 Batteries, rechargeable batteries and button cells ................................ 8 Cleaning ...........................................................................
1 About this document 1 About this document • The Testo Information document is an integral part of the product. • Read this document through carefully to prevent injuries and damage to the product. Familiarize yourself with the product before using it. • Keep this documentation to hand so that you can refer to it when necessary. • Hand this documentation on to any subsequent users of the product.
2 General safety instructions 2 General safety instructions You will find product-specific safety instructions, approvals and technical data in the accompanying documentation or on the Testo website, www.testo.com, under the product-specific download. • Only operate the product properly, for its intended purpose, and within the parameters specified in the technical data. • Do not apply any force. • Do not operate the product if there are signs of damage on the housing, mains unit or connected cables.
2 General safety instructions • Temperature information given on probes/sensors relates only to the measuring range of the sensor technology. Do not expose handles and supply lines to temperatures above 45°C (113°F), unless they are explicitly approved for higher temperatures. WARNING Risk of burns due to hot probes, probe shafts and sensor tips! Do not get hold of hot parts (> 45°C/113°F) with bare hands immediately after a measurement.
3 Disposal 3 Disposal • Dispose of faulty energy storage units in accordance with the valid legal specifications. • At the end of its useful life, deliver the product to the separate collection point for electric and electronic devices (observe local regulations) or return the product to Testo for disposal. • • WEEE Reg. no. DE 75334352 Any button cells that may be used in a Testo product contain 1,2Dimethoxyethane (CAS 110-71-4). In this connection, see EU Regulation no. 1907/2006 (REACH) Art. 33.
4 Batteries, rechargeable batteries and button cells • Do not deform batteries. Batteries must not be squashed, drilled, dismantled, pierced, modified or damaged in any other way. This may lead to the leakage of battery acid, to the escape of gases and/or to an explosion. • Do not heat batteries above the permitted temperature or burn them. If a battery is heated, this may lead to the leakage of battery acid and/or to an explosion.
5 Cleaning • Lithium batteries must be transported and shipped in accordance with the local and country-specific regulations. • If there is any contact with the skin or eyes, the areas must be rinsed with water for at least 15 minutes. If there is any contact with the eyes, a doctor must be contacted in addition to the rinsing. • If burns are caused, these must be treated appropriately. You are also strongly advised to contact a doctor.
7 Storage 7 Storage • Keep the product away from any liquids and do not put it into water. Protect it from rain and humidity. • Do not store the product together with solvents. 8 Approvals Please find the current country approvals in the attached document. Please note the following country-specific information for the product authorization.
Testo SE & Co. KGaA Testo-Strasse 1 D-79853 Lenzkirch Germany Phone: +49 7653 681-0 Fax: +49 7653 681-7699 E-mail: info@testo.de www.testo.