testo • Smart Probes Startup instruction All Smart Probes only work in combination with a mobile terminal and the testo Smart Probes App.
Overview 1 Safety 1.1. Safety with testo 510i WARNING Magnetic field May be harmful to those with pacemakers. > Keep a minimum distance of 10 cm between pacemaker and instrument. 1.2. Safety with testo 549i WARNING Risk of injury caused by pressurized, hot, cold or toxic refrigerants/media! > Only to be used by qualified staff. > Wear protective goggles and safety gloves. > Before applying pressure to the measuring instrument: always fix the instrument tightly onto the pressure connection.
4 Bluetooth® module 3 Switching on/off 3.1. Switching on Testo 549i 1. 2. - Pull the film out of the battery compartment. Press the key. The Smart Probes switch on. 3.2. Switching off 1. - Press and hold the key. The Smart Probes switch off. 4 Bluetooth® module 4.1. Establishing Bluetooth® connection You need a Tablet or Smartphone with the Testo Smart Probes App already installed on it to be able to establish a Bluetooth connection.
6 Transmitting reading 5 LED status LED status Meaning Flashing red Low battery status Flashing yellow • • Smart Probe is switched on. Smart Probe searching, but not yet connected. Flashing green • • Smart Probe is switched on. Bluetooth is connected. 6 Transmitting reading ✓ 1. 2. 3. - The Smart Probes are switched on and connected to their mobile terminal via Bluetooth. The Smart Probes' readings are automatically shown in the standard display. Press the key.