NUBO Rosetta User Guide · Components 1 · Name of each part 1 · How to use 2
Components · Nouveau Rosetta Body · User guide Name of each part A. Pen lid B. Ballpoint pen refill C. Touchpad D. Display E.
How to use 1. Power management · Holding the pen in low power mode turns it on. ❮The text “nubo” (default) appears on the pen's display and motion begins with vibration.❯ · After 3 minutes of inactivity, the pen will go into low-power mode to minimize power consumption. ❮The text “Sleep mode” appears on the pen's display and the operation ends.❯ · If the battery is low, the text “Low battery” will be displayed instead of the words.
How to use 2-2. Memorization words · When the foreign language and meaning are output, rub them in the direction of the arrow as shown below to classify them as memorized words. ❮The text “Erase a word” is printed and classified as a memorized word and no longer exposed.❯ · If you have memorized all the words, the text “Memorized all” is displayed. ❮We recommend updating to higher level words.❯ 3. Timer function · Rub the pen side twice in the direction of the arrow as shown below to activate the timer.
FCC Information This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions : (1) This Device may not cause harmful interface, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules.
