Dual Monitor HDMI KVM USER MANUAL ENJOY THE VIVID WORLD HDMI Dual
HDMI Dual Features: Using only 1 set of keyboard, mouse and 2 monitors to control 2 computers Support Unix/Windows/Debian/Ubuntu/Fedora/Mac OS X/Raspbian/Ubuntu for Raspberry Pi and other Linux basic system Support resolution up to 3840*2160@60HZ Support hot plug, disconnect or connect devices to the KVM at any time without turning off PC With EDID emulators in each input port , keep PCs always have correct information , prevent displays setting change while switching input ports Suppo
HDMI Dual Panel Description: 1 3 2 4 5 6 8 ID 2 Name 7 9 10 11 12 Description 1 DC 12V DC 12V power supply 2 L/R audio ouput Analog audio output, connect to speaker 3 HDMI output ports Connect to HDMI displays 4 Standard USB 2.0 port Connect to USB 2.
HDMI Dual ID Name Description HDMI input A/B:Connect to the two outputs of the same computer 7 PC 1 Input 8 USB connection status LEDs will be lit if the USB TypeB ports connect to computers, and computers are on 9 Input selection status Indicate current active selected input source LED1 on: Both monitors display PC1 LED2 is on: Both monitors display PC2 LED1&LED2 on: One monitor display one PC 10 Input selection button Switch inputs between 2PCs 11 IR receiver Receive IR remote signal 12
HDMI Dual Display Mode: Display mode 1: LED1 on: Both monitors display PC1 LED2 on: Both monitors display PC2 Display mode 2: LED1&LED2 on: One monitor display one PC Connection Diagram : Step1:Connect the two outputs of the PC1 to the Input A and Input B of the KVM PC1 inputs. Connect the USB of the PC to the USB of the KVM PC1 inputs with USB type A to B cable HDMI cable USB type-A to type-B cable Note: Both Input A and Input B should be connected to the same computer.
HDMI Dual Step 2: Connect keyboard, mouse or wireless dongle of the keyboard and mouse to the specified ports. Keyboard Mouse Barcode Scanner USB drive Printer Step 3: Connect speaker and monitor to the KVM. Monitor 1 Monitor 2 HDMI cable Speaker Step 4: Turn on the power switch to start the Dual Monitor KVM. How To Use : 1. Set up the connection according to the connection diagram. 2.
HDMI Dual How to use keyboard hot keys : Press [Right-Alt] key twice to change active selected computer in display mode 2 Right -Alt + Right -Alt Scroll Lock + Scroll Lock + 1 Select input source 1 in display mode 1 Scroll Lock + Scroll Lock + 2 Select input source 2 in display mode 1 Scroll Lock + Scroll Lock + 3 Keyboard and mouse focus on the desktop of input source 1 in display mode 2 Scroll Lock + Scroll Lock + 4 Keyboard and mouse focus on the desktop of input source 2 in d
HDMI Dual How to identify whether the KVM is in keyboard and mouse pass through mode? Turn on the KVM, press [Scroll Lock] + [Scroll Lock] + [F3]，if buzzer beeping twice, the KVM is in keyboard and mouse pass through mode. And beeping once means in keyboard and mouse emulation mode.
HDMI Dual IR Remote Control : Key M P 1 2 3 4 Remote Control Display mode 1 Display mode 2 M Cyclically select PC1 and PC2 Switch to Display mode 1 P Switch to Display mode 2 Swap the desktops of two monitors 1 Switch to PC 1 Keyboard and mouse focus on the desktop of PC 1 2 Switch to PC 2 Keyboard and mouse focus on the desktop of PC 2 Note: For the safety request by some express company, the remote control is not equipped battery by default.
Warranty Information: We warrant this product as free of defects in material and workmanship for a period of one (1) year from the date of shipment. If during the period of warranty this product proves defective under normal use, we will repair or replace this product, provided that this product has not been subjected to mechanical, electrical, or other abuse or modifications.
