Dual Monitor KVM USER MANUAL ENJOY THE VIVID WORLD
DP HDMI Features : Using only 1 set of keyboard, mouse and 2 monitors to control 2 computers Support Unix/Windows/Debian/Ubuntu/Fedora/Mac OS X/ Raspbian/Ubuntu for Raspberry Pi and other Linux based systems Support hot plug, connect or disconnect devices to the KVM at any time without turning off PC Support keyboard hotkeys, front-panel keys and IR remote control to control the KVM Available to use keyboard and mouse without any delay after switching PC Support resolution up t
DP HDMI Panel Description : 1 6 2 7 8 9 10 2 3 5 4 11 12 ID Name Description 1 USB connection status LEDs will be lit if the USB TypeB ports connect to computers, and computers are on 2 Input selection status Indicate current active selected input source LED1 on: Both monitors display PC1 LED2 is on: Both monitors display PC2 LED1&LED2 on: One monitor display one PC 3 Input selection button Switch inputs between 2PCs 4 IR receiver Receive IR remote signal 5 Power switch Turn
DP HDMI ID Name Description 7 L/R audio output Analog audio output, connect to speaker 8 HDMI output Connect to HDMI display 9 Keyboard and mouse input Connect to keyboard and mouse Standard USB 2.0 port Connect to USB 2.
DP HDMI Display Mode: Display mode 1: LED1 on: Both monitors display PC1 LED2 on: Both monitors display PC2 Display mode 2: LED1&LED2 on: One monitor display one PC Connection Diagram : Step1:Connect the two outputs of the PC1 to the Input A and Input B of the KVM PC1 inputs. Connect the USB of the PC to the USB of the KVM PC1 inputs with USB type A to B cable HDMI cable DP cable USB type-A to type-B cable Note: Both Input A and Input B should be connected to the same computer.
DP HDMI Step 2: Connect keyboard, mouse or wireless dongle of the keyboard and mouse to the specified ports. Keyboard Mouse Barcode Scanner USB drive Printer Step 3: Connect speaker and monitor to the KVM. Monitor 2 Monitor 1 HDMI cable Speaker Step 4: Turn on the power switch to start the Dual Monitor KVM. How To Use : 1. Set up the connection according to the connection diagram. 2.
DP HDMI How to use keyboard hot keys : Press [Right-Alt] key twice to change active selected computer in display mode 2 Right -Alt + Right -Alt Scroll Lock + Scroll Lock + 1 Select input source 1 in display mode 1 Scroll Lock + Scroll Lock + 2 Select input source 2 in display mode 1 Scroll Lock + Scroll Lock + 3 Keyboard and mouse focus on the desktop of input source 1 in display mode 2 Scroll Lock + Scroll Lock + 4 Keyboard and mouse focus on the desktop of input source 2 in dis
DP HDMI How to identify whether the KVM is in keyboard and mouse pass through mode? Turn on the KVM, press [Scroll Lock] + [Scroll Lock] + [F3],if buzzer beeping twice, the KVM is in keyboard and mouse pass through mode. And beeping once means in keyboard and mouse emulation mode.
DP HDMI IR Remote Control : Key M P 1 2 3 4 Remote Control Display mode 1 Display mode 2 M Cyclically select PC1 and PC2 Switch to Display mode 1 P Switch to Display mode 2 Swap the desktops of two monitors 1 Switch to PC 1 Keyboard and mouse focus on the desktop of PC 1 2 Switch to PC 2 Keyboard and mouse focus on the desktop of PC 2 Note: For the safety request by some express company, the remote control is not equipped battery by default.
DP HDMI Verified keyboards and mouses: Mouse Model Keyboard Model Logitech G500S Logitech G105 Microsoft Wireless Mouse 2000 Microsoft Wireless Mouse 2000 Hewlett-Packard M100 Dareu CK535 Zklli ZM500-5 ME TOO Z5 FL.SPORTS G12 Aigo 8362 Aigo WQ-641 AJAZZ AK35I LDK.al Colourful X800 Acer KB21-2X Note: The above list is part of the verified keyboards and mouses list with special HID protocol.
Warranty Information :