Information

productinformation
Page 1 of 1 - As of 28/06/2017 - en
For latest information on this product please visit http://l.tesa.com/?ip=04316
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical
information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered
as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not
limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa®
product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical support staff will be
glad to support you.
tesa® 4316 PV3
Finely crêped paper masking tape for spray painting
tesa® 4316 is a finely crêped paper masking tape. The product is thin and flexible and, therefore, suitable for all general
masking applications, as well as oven drying applications up to a temperature of 100 °C.
Main Application
The product is resistant to wet sanding. Paints and fillers ad-here well to the backing.
The material can be used on painted metal, rubber, glass and chrome parts.
Technical Data
▪ Backing material slightly-creped paper
▪ Total thickness 140 µm
▪ Type of adhesive natural rubber
▪ Adhesion to steel 3.4 N/cm
▪ Elongation at break 10 %
▪ Tensile strength 38 N/cm
▪ Temperature resistance 100 °C
Properties
▪ Hand tearability
▪ Easy to remove yes
▪ Paint anchorage
▪ Sharp colour edge
▪ Conformability
Evaluation across relevant tesa® assortment: very good good medium low