Instruction Manual

A: Wireless Antenna

B: Power Input

C: Micro HDMI Video Input

D: Mode Button

E: Auxiliary Connector

F: Stream Status Indicator

G: Client Status Indicator

H: Access Point Status Indicator

I: Reset Button

J: WiFi Status Indicator

K: Encoder Status Indicator

L: Video Status Indicator

G H I J K L

LED Description Off Red/Yellow Blue

Stream Not streaming Client not responding Streaming

Client No clients N/A AP Mode

• Solid: Client(s)

Connected

Infrastructure mode

• Blinking: Connecting

• Solid: Connected

AP (Access Point) N/A Infrastructure Mode AP Mode

WiFi Not configured 2.4GHz 5GHz

Encoder Not encoding Restarting/no host Ready/Encoding

Video No video Video not supported Video sync

GETTING STARTED

iOS users − download the

TeraClip app.

Connect iPad to Clip’s network.

(WiFi SSID − CLIP−xxxx)

Plug power and video into

Clip. Attach antennas.

Open the TeraClip app.

Button Operation

Mode Button

• Hold for 1−2 seconds: Switches stream destination (when multiple

clients are connected).

• Hold for 6−8 seconds: Toggles between AP mode and Infrastructure

mode (if configured).

Reset Button

• Hold for 5 seconds: factory reset.

PAGE 1
A: Wireless Antenna B: Power Input C: Micro HDMI Video Input D: Mode Button E: Auxiliary Connector F: Stream Status Indicator G: Client Status Indicator H: Access Point Status Indicator I: Reset Button J: WiFi Status Indicator K: Encoder Status Indicator L: Video Status Indicator A B C D E LED Description Off F G H Red/Yellow Stream Not streaming Client not responding Client No clients N/A AP (Access Point) N/A Infrastructure Mode WiFi Not configured 2.
PAGE 2
IPAD APP F G H A I B J C K D E A: Device Information B: Video Input Status C: Encoder Information D: WiFi Network Information E: Player Status F: Browse Devices G: H: I: J: K: Controls Settings Encoder Settings Player Controls Stop Watch/Timer A: Displays Clip’s device name, serial number and IP address. B: Displays input video resolution. C: Displays current video quality and delay. D: Displays the SSID of connected WiFi network. E: Displays video stream bitrate and the load on the player.