User's Manual

ManualsBrandsTera Tron ManualsElectronicsCAN Immobilizer Key-Plugin

Reference Test report no. 16010487

EUT: CAN Immobilizer

Key-Plugin

FCC ID: QLXIMMOP

FCC Title 47 CFR Part 15

Date of issue: 2016-07-26

Date: 2015-03-13

Vers. no. 1.15

m. dudde hochfrequenz-technik

Rottland 5a

D-51429 Bergisch Gladbach/ Germany

Tel: +49 2207-96890

Fax +49 2207-968920

Annex acc. to FCC Title 47 CFR Part 15

relating to

TeraTron GmbH

CAN Immobilizer Key-Plugin

Annex no. 5

User Manual

Functional Description

(with compliance statements)

Title 47 - Telecommunication

Part 15 - Radio Frequency Devices

Subpart C – Intentional Radiators

Measurement Procedure:

ANSI C63.4-2014

ANSI C63.10-2013

Summary of content (4 pages)

PAGE 1
Reference Test report no. 16010487 EUT: CAN Immobilizer Key-Plugin FCC ID: QLXIMMOP FCC Title 47 CFR Part 15 Date of issue: 2016-07-26 Annex acc. to FCC Title 47 CFR Part 15 relating to TeraTron GmbH CAN Immobilizer Key-Plugin Annex no. 5 User Manual Functional Description (with compliance statements) Title 47 - Telecommunication Part 15 - Radio Frequency Devices Subpart C – Intentional Radiators Measurement Procedure: ANSI C63.4-2014 ANSI C63.10-2013 Date: 2015-03-13 m.
PAGE 2
Reference Test report no. 16010487 EUT: CAN Immobilizer Key-Plugin FCC ID: QLXIMMOP FCC Title 47 CFR Part 15 Date of issue: 2016-07-26 User Manual / Functional Description of the test equipment (EUT) Date: 2015-03-13 m. dudde hochfrequenz-technik Vers. no. 1.
PAGE 3
Block diagram CAN Immobilizer Key-Plugin Document no. Project Document for Revision Generate 1.0 MSC CAN Immobilizer Key-Plugin Block Diagram CAN Immobilizer Key-Plugin FCC Approved RHE Confidentiality Strictly confidential Creation date: 26.07.2016 Page Document 1 of 2 CAN Immobilizer Key-Plugin Block diagram.
PAGE 4
Block diagram CAN Immobilizer Key-Plugin Document no. Project Document for CAN Immobilizer Key-Plugin Block Diagram CAN Immobilizer Key-Plugin FCC Creation date: 26.07.2016 Description of block diagram CAN Immobilizer Key-Plugin The µP is clocked by a 8MHz-Resonator. The active components are powered by 5V from a linear LDO regulator. The 125kHz-Reader drives the 125kHz coil antenna. By the switch / interface the electronic will be powered on. The data will be transmitted via the CANinterface.