Users Manual

ManualsBrandsTera Tron ManualsElectronicsCentral Door Lock

Functional description

The main function of the system is to lock / unlock the mechanical door lock, and to open

the cabin door via a RF remote control transmitter key (868/916MHz) with the electronic

box as RF receiver/transceiver.

Tyco HDSCS1,5

1-1670730-1

black

Volvo PN 993364

central

door

locking

motor

opening

support

motor

power cable

coming from

cabin

recept.

recept

recept.

rotor

switch

electronic box

PCB is

moulded in

potting material

14 cm

0,75 mm²

50 cm

0,5

1 cm

0,75 mm²

14 cm

0,75 mm²

tab

Tyco HDSCS1,5

1-1418448-2 black

Volvo PN 993360

Tyco HDSCS1,5

2-1418448-1 gray

Volvo PN ?

Tyco HDSCS1,5

2-1670730-1

gray

Volvo PN ?

Tyco HDSCS1,5

1-1418469-1 black

Volvo PN 993370

Tyco HDSCS1,5

1-1703773-1 black

Volvo PN 993371

Tyco HDSCS1,5

3-1418448-2 green

Volvo PN ?

Tyco HDSCS1,5

3-1670730-1 green

Volvo PN ?

tab

recept.

tab = Sealed Tab Contacts = Stecker

recept. = Sealed Receptacle Contacts = Buchse

10 wires,

direct

soldered on

the PCB

Transmitter with

mechanical key,

3 buttons and

2 multi-colour LED

Summary of content (4 pages)

PAGE 1
Functional description The main function of the system is to lock / unlock the mechanical door lock, and to open the cabin door via a RF remote control transmitter key (868/916MHz) with the electronic box as RF receiver/transceiver.
PAGE 2
Picture 1 shows the door lock mechanism with tow fitted motors and CDL-OS controller with all connectors, the rotor switch, and the RF remote control transmitter key.
PAGE 3
General Function The system is powered directly from the vehicle battery (24V system). Both motors are switched by a full bridge driver in the electronic box. The CDL motor has an internal switch for signalling the mechanical position to the electronic controller. The OS motor has an integrated strong spring for pulling the motor back into the “zero position”, so the OS motor needs no switch inside. The system can be used in both 12V and 24V systems. The CDL and OS motors are 12V motors.
PAGE 4
CDL0236 Compliance Statements Document no. Project Document for CDL0236 Compliance Statements CDL0236 FCC and IC Creation date: 11.10.2019 CDL0236 Compliance Statements Compliance Statements FCC The title “CAUTION TO USERS” or “FCC/IC WARNING NOTE” or relevant title and “Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.” This device complies with Part 15 of the FCC Rules.