User's Manual

ManualsBrandsTenvis Technology ManualsCamera & PhotoIP CAMERA

CAMERA SETUP continued

Flush ARP Buffer

ARP stands for Address Resolution Protocol. It is used to associate a layer 3 (Network layer) address

(such as an IP address) with a layer 2 (Data Link layer) address (MAC address). When a wired

network and a wireless network of the camera both use the same fixed IP address, a problem may

occur where connections to web pages will time out and fail. Use the Flush ARP Buffer to clear the

ARP cache and fix the error.

5. Access the IP camera through the IP Camera Tool or IE directly. Either:

s Double click the IP address of the IP camera listed in the search result window. Internet Explorer will be

opened automatically and display the camera login page.

Access the camera via the Internet Explorer browser directly by typing in the camera’s IP address. In the window

that appears, click the ‘

6. The Camera Login page will pop up. Enter your account and password on the login page.

By default administrator’s username is: admin and no password. Click Sign in to enter the

monitoring page. You can enter the page as an Administrator, Operator or Visitor. Each type of user

will allow different levels of access on the web browser interface. Read below for more information

on the access rights and user interface.

Visitor: In this mode, you can only view.

Operator: You can control the image setting of IP Camera and set some parameters.

Administrator: You can setup the advanced configurations of the IP Camera.

7. If you are using a PC, follow the top link for IE Browsers. This will activate ActiveX which allows

access to additional functions of the user interface.

If you are a Mac user, you can view the camera via the second link, Server Push Mode. This web

browser mode features limited functionality but allows Live View and Image Snapshots.

Summary of content (6 pages)

PAGE 1
C A M E R A SE T U P c o n t i n u e d Flush ARP Buffer ARP stands for Address Resolution Protocol. It is used to associate a layer 3 (Network layer) address (such as an IP address) with a layer 2 (Data Link layer) address (MAC address). When a wired network and a wireless network of the camera both use the same fixed IP address, a problem may occur where connections to web pages will time out and fail. Use the Flush ARP Buffer to clear the ARP cache and fix the error. 5.
PAGE 2
C A M E R A SE T U P c o n t i n u e d Main User Interface (as seen in Internet Explorer) Device Status Indicates the number of cameras connected on the network. For Viewer Allows you to view Full Screen or in Split Screen. Select the icons according to the view preferred. For example: Select for Full Screen, for Quad view or for Multi Split Screen. Add timestamp on record When checked, a timestamp will be added in the bottom right corner of recorded videos.
PAGE 3
C A M E R A SE T U P c o n t i n u e d Snapshot: Click the icon to take a snapshot image. Note: Recorded video file names will be saved in the format: CameraName_ Current time. For example: IPCAM_20081211134442. This recording is from the camera called IPCAM and the recording ‘end’ time was 13:44:42 on December 11, 2008. For operator When you login as an Operator or Administrator, you can enter the ‘For Operator’ page.
PAGE 4
C A M E R A SE T U P c o n t i n u e d User Settings - You can configure up to 8 user names and passwords and the level of users as Administrator, Operator or Visitor. Administrators can: Set Record Path - Click ‘Browse’ to choose the recording path of where video files will be saved. Set Alarm Record Path - Click ‘Browse’ to choose the alarm recording path. Note: 1. The default path for saving files is C:\Documents and Settings\All Users\Documents. 2.
PAGE 5
C A M E R A SE T U P c o n t i n u e d Multi-Device Settings In the Multi Device Settings page, you can see all devices searched in the LAN. The ‘1st Device’ is the default IP camera. You can add more cameras to the list in the network for monitoring. The web browser software supports up to 9 IP cameras simultaneously. To add cameras to the LAN Click ‘The 2nd Device’ and double click the IP camera from the ‘Device List in LAN’. The Alias Host and HTTP Port will fill in automatically.
PAGE 6
C A M E R A SE T U P c o n t i n u e d Wireless LAN Settings Enter the wireless settings page of the Wireless Router to find out the SSID, Channel, Encryption and Authentication details. This product supports WEP and WAP security encryption. ADSL Settings When connected to the Internet through ADSL, you can enter the ADSL username and password obtained from your ISP. DDNS Service Settings The system supports protocols from some DDNS providers such as dyndns.org.