ec-H2O Module Replacement Kit

Module Replacement K it
KIT NO. 9007970, 9006270-- 7300/8300/T16 models
Models: T3, T3+, T3e, T5, T5e, T7, T15, T16, 5680, 5700,
7100, 7300, 8300, Speed Scrubs and Speed Scrub Rider
9006330 Rev. 01 (05--11) Tennant Company www.tennantco.com North America Customer Service: (800) 553--8033 or (763) 513--2850
KIT INSTALLATION INSTRUCTIONS:
Installation Time: 1 hour
TOOLS REQUIRED: Phillips Screwdriver , Pliers, Hose
Cutter (T3/T3+ Models: 7mm & 10mm Wrench).
1. Drain the solution and recovery tanks.
2. Park machine on a level surface, turn machine off
and remove key.
3. Remove the defective ec--H2O module from the
machine. NOTE: T3/T3+ Models -- The front shroud
and recovery tank assembly must be removed to
access the module.
4. Cut the inlet and outlet hoses on the new module as
specified below.
5. Adjust the DIP switches on the new module as
specified below and install module plug.
6. Install new module and check the machine for
proper operation.
T5 28”/700mm
32”/800mm
Disk
29”/74cm
29”/74cm
T5e/Speed Scrub
T5
32”/800mm
Cylindrical
T5e/Speed Scrub
26”/66cm 26”/66cm
29”/74cm 29”/74cm
26”/66cm 26”/66cm


T5e/Speed Scrub
5680/5700
Model
5680/5700
5680/5700
5680/5700
28”/700mm & 32”/800mm Cyl
28”/700mm & 32”/800mm Disk
36”/900mm Cylindrical
36”/900mm Disk
New
Module
Cut Hoses as
Specified:
Module
Plug
Set DIP
Switches
* Standard Settings. For optional solution flow rate settings, contact the Customer Service Department.
T7/Speed Scrub Rider
Disk
T7/Speed Scrub Rider
Cylindrical
(A)
Inlet
Hose
(B)
Outlet
Hose
Inlet Hose
Length
(A)
Outlet
Hose
Length (B)
14”
36cm
14”
36cm
14”
36cm
14”
36cm
14”
36cm
14”
36cm
14”
36cm
14”
36cm
T5
24”/600mm
Disk
29”/74cm
29”/74cm
26”/66cm
26”/66cm
T5
26”/650mm
Cylindrical
T5e/Speed Scrub
29”/74cm
29”/74cm
26”/66cm
26”/66cm
T3
17”/43cm
20”/50cm
Disk
T3e/Speed Scrub
12”/30cm
12”/30cm
63”/160cm 58”/147cm
3”/8cm
3”/8cm
3”/8cm 34”/36cm
DIP Switch Setting*

Machine Type
Water
Flow Rate








T15 Disk
5”/13cm 5”/13cm


T15 Cylindrical
5”/13cm 5”/13cm
7300, 8300
T16 Cylindrical

T16

Disk
6.5”/16.5cm
9”/23cm
2.25”/5.7cm 5”/13cm
T5 Model NOTE:
Install hose clamp, supplied with
kit, as shown. This will prevent
solution hose from kinking.
Flow
Direction
Arrow
T3+
24”/600mm
Disk
12”/30cm 12”/30cm

63”/160cm 58”/147cm
6.5”/16.5cm 9”/13cm
T3e/Speed Scrub XC
7100 Disk
7100 Cylindrical
9.25”/23.5cm
11.25”/25.5cm
12 34 56
DIP Switch Numbers
 =OFF
 =ON
Speed Scrub
(Aldi Stores)
28”/700mm
Disk
26”/66cm 26”/66cm

Clamp
p/n 140328
Top View of Module
9.25”/23.5cm
11.25”/25.5cm
Refer to chart for
proper settings
Home