ec-H2O Module Controller Kit (For WesClean Customers Only)
Controller Replacement Kit
KIT NO. 9006163
Models: T3, T3+, T3e, T5, T5e, T7, T15, T16, 5680, 5700, 7100,
7300, 8300, Speed Scrubs and Speed Scrub Rider
9006164 Rev. 01 (05--11) Tennant Company www.tennantco.com North America Customer Service: (800) 553--8033 or (763) 513--2850
KIT INSTALLATION INSTRUCTIONS:
Installation Time: 1 hour
TOOLS REQUIRED:
Phillips Screwdriver (T3/T3+ Models:
7mm & 10mm W r ench).
1. Turn machine off and remove key.
2. Remove the ecH2O module (black box) from the
machine’s metal mounting bracket.
T3/T3+ Models -- The front shroud/recovery tank
assembly must be removed to access module.
3. Remove the defective controller from the module as
shown. Four screws hold it in place.
4. Adjust the DIP switches on the new controller
accordingly (see chart below).
ATTENTION: When handling controller, use the
static ground strap, supplied with kit, to prevent
possible controller damage.
5. Install new controller, replace module and check the
machine for proper operation.
Kit Contents
Part No. Description Qty.
-- CONTROLLER, ASM. 1
27964 STRAP, GROUND, STATIC, DISPOSABLE 1
ecH2O
Module
Controller
Static
Strap
DIP Switches
DIP Switch Setting*
Model
Controller
DIP Switches
12 34 56
T3, T3e, Speed Scrub (17”/43cm & 20”/50cm Disk)
T3+, T3e, Scrub Scrub XC (24”/60mm)
T5, T5e, Speed Scrub (24”/600mm Disk)
T5, T5e, Speed Scrub (28”/700mm & 32”/800mm Disk)
Speed Scrub (28”/700mm Disk --Aldi Stores only)
T5, T5e, Speed Scrub (26”/650mm Cylindrical)
T5, T5e, Speed Scrub (32”/800mm Cylindrical)
T7, Speed Scrub Rider (Disk)
T7, Speed Scrub Rider (Cylindrical)
T15, 7100 (Disk)
T15, 7100 (Cylindrical)
T16 (Disk)
T16 (Cylindrical)
5680, 5700 (36”/900mm Disk)
5680, 5700 (36”/900mm Cylindrical)
5680, 5700 (28”/700mm & 32”/800mm Disk)
5680, 5700 (28”/700mm & 32”/800mm Cylindrical)
7300, 8300
Machine Type
Water
Flow Rate
OFF
ON
=OFF
=ON
DIP Switch Numbers
* Standard Settings. For optional water flow rate settings, contact the Customer Service Department.
Home