Actuator Housing
Spring Housing / Actuator Replacement
KIT NO. 9002550 / 9002551
Mo dels: T7, Speed Scrub Rider
1031547 Rev. 00 (04--06) Tennant Company Customer Service: (800) 553--8033 or (763) 513--2850
Installation Notice!
This notice applies to machines manufactured before serial number 10280389.
IMPORTANT: Befor e installing the new spring housing or actuator, the squeegee arm
weldment must be modified as shown below . This will prevent the arm from coming in
contact with the rear wheel axle, elim inati ng fur ther spr ing housing or actuator damage .
For a new modified squ eeg ee arm weldment, order part no. 1031379.
Kit Installation Time: 2 Hours
1.50
(40mm)
.375 (9.5mm)
NOTE: After installing the replacement parts, cycle the ignition key on/off a couple of
times to ensure proper clearance between the squeegee arm weldment and axle.
Squeegee Arm Weldment
Using a die--grinder , carefully
remove the material as specified.
Blow out the metal shavings and
touch up any exposed metal with
black paint.
SQUEEGEE ARM WELDMENT MODIFICATION
SAFETY GLASSES AND
GLOVES REQUIRED