Daily Checklist

E:\TECHTR\MACHINES\M20\M20 ENGLISH OpCk.doc
T17
Before Operation - Checklist
Before cleaning with your machine there are a few pre-operational checks to perform to
confirm your machine is ready for use.
 Check the battery fluid level and fill, if required.
 Check the battery charge level and charge the battery, if required.
 Check the headlights, taillights and safety lights.
 Check the safety alarms.
 Check the condition of the main brushes.
Remove any string, banding, plastic wrap, or other debris wrapped around the brushes.
 Check the main brush compartment right hand squeegee for damage and wear.
 Check the optional right side scrubbing brush for damage or wear.
Remove any string, banding, plastic wrap, or other debris wrapped around the brush.
 Check the optional right side sweeping brush for damage or wear.
Remove any string, banding, plastic wrap, or other debris wrapped around the brush.
 Check the condition of the right side brush skirt or squeegee.
 Check the solution tank cover seal for damage and wear.
 Check the recovery tank cover seal for damage and wear.
 Confirm the vacuum fan filter is clean.
 Confirm the optional ES filter is clean.
 Check the vacuum hose for debris or blockage.
 Check the squeegees for damage and wear.
 Check the
 Check the optional SE (Seveir Environment) / ES detergent concentrate level and fill as
needed.
 Check the main brush compartment left hand squeegee for damage and wear.
 Check the optional left side scrubbing brush for damage or wear.
Remove any string, banding, plastic wrap, or other debris wrapped around the brush.
 Confirm the recovery tank is drained and clean
 If using the optional ec-H2O solution system.
 Ensure all conventional cleaning agents are drained and rinsed from the solution tank.
NOTE: When ec-H2O Scrubbing: Ensure the solution tank is filled with clear cool water
only.
 Check the steering and brakes for proper operation.
 Check the service records to determine maintenance requirements.
List issues identified during this inspection or that occurred during machine operation.
___________________________________________________________________________________
___________________________________________________________________________________
OPERATOR ____________________________ DATE _____________________________
SUPERVISOR ___________________________ DATE ____________________________