Whole Home Mesh WiFi System Quick Installation Guide
Package contents nova MW6 x 3 Ethernet cable x 1 Power adapter x 3 Quick installation guide x 1 Know your device LAN port WAN/LAN port DC power jack Reset Reset button
Ⅰ Connect a single nova unit 1. Power off your modem, and remove and reinstall its battery (if any). 2. Use the included Ethernet cable to connect a LAN port of your modem to the WAN port of any nova unit . 3. Use one of the included power adapters to connect the nova unit to a power source. 4. Power on your modem.
Ⅱ Install the Tenda WiFi app Download the Tenda WiFi app on your mobile device by searching for Tenda WiFi in App Store or Google Play or by scanning the following QR code. Then, install the app.
Ⅲ Connect the mobile device to the nova unit Go to the WiFi net work list on your mobile device, select the SSID of the nova unit , and enter its password. The SSID and password are specified on the label of the nova unit . SSID: NOVA_XXXX Password: 12:23PM Settings Wi-Fi Wi-Fi NOVA_XXXX CHOOSE A NETWORK...
Ⅳ Connect the nova unit to the Internet Run the Tenda WiFi app and follow the onscreen instructions to connect the nova unit to the internet . After the nova unit is connected to the internet , its LED should turn solid blue.
Ⅴ Connect the other nova units to the Internet 1.
2. Use the other included power adapters to connect the remaining nova units to power sources. 3. Wait about 1 minute until each nova unit 's LED lights one of the following colors: Solid blue Good connection Solid yellow Fair connection Solid magenta Poor connection Solid red Disconnected 4. If a nova unit 's LED does not light solid blue, move the unit closer to another to get it better connected. Now you can enjoy a seamless and reliable internet experience on your WiFi devices.
FAQ Q1: How can I set up a WiFi net work without configuration? A1: If you use the Dynamic IP connection t ype, you can simply perform steps I, III, and V to connect the nova units. When all the nova units' LEDs light solid blue, your WiFi net work is set up. Q2: What should I do if I cannot access the Internet after setting up my Wi-Fi network? A2: Verif y that: - You powered off your router before connecting it to the first nova unit .
CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radiointerference, in which case the user may be required to take adequate measures. Operations in the 5.15-5.25GHz band are restricted to indoor use only. This equipment should be installed and operated with minimum distance 20cm bet ween the radiator & your body. NOTE: ( 1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment .
FCC St at ement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Radiat ion Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment should be installed and operated with minimum distance 20cm bet ween the radiator & your body. Caut ion: Any changes or modifications not expressly approved by the part y responsible for compliance could void the user's authorit y to operate this equipment.
RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys new electrical or electronic equipment.
Technical Support Shenzhen Tenda Technology Co., Ltd. 6-8 Floor, Tower E3, No. 1001, Zhongshanyuan Road, Nanshan District , Shenzhen, China. 518052 USA hotline: 1-800-570-5892 Toll Free: Daily-9am to 6pm EST Canada hotline: 1-888-998-8966 Toll Free: Mon - Fri 9 am - 6 pm PST Website: http://www.tendaus.com Email: support .usa@tenda.com.cn Hong Kong hotline: 00852-81931998 Website: http://www.tendacn.com Email: support@tenda.com.cn Copyright © 2017 Shenzhen Tenda Technology Co., Ltd. All rights reserved.
