WiFi Audio Receiver
Introduction： This wireless audio streamer is of great performance and especially designed to meet the high demand of the installation market. This system uses free iOS and Android applications to easily control the audio system. You can steam the same music to all zones or different music to different zones, no matter the music from call phone memory or online steaming services such as Spotify. Content： Wifi Audio Receiver 3.
Interface and Function： STATUS SPDIF AUX IN AUX OUT DC 5V LAN WPS SPDIF : Audio Source Input for Digital Audio AUX IN : Audio Source Input for 3.5mm Audio Cable AUX OUT : Audio Source Output for 3.5 Audio Cable DC 5V : For Power LAN : For Network Router WPS : Press to activate WPS, long press for factory reset Indicator Link Status Light: a. No Light: Unit powered off or connected to line in input b. Blue flashing: Startup mode, searching for network c.
Installation Guide： 1. Unpack Verify all the accessories are included in the package. 2. Place Fix the amplifier at a safe and proper location. Note: The antenna should not be attached to metal and kept away from metal materials. 3. Connect -Power connection Power the amplifier with the power adaptor included in the accessories. -Audio connection Use the terminal provided by the product to connect speakers. 4.
. Configure： I. Connect your mobile device to your network. II. Power the device. III. After waiting for the blue light of the device to flash slowly, choose the hotspot (SoundSystem_xxxx) in the WiFi setting on your cell phone and connect. IV. Open the application (4STREAM or MUZO Player). V. Application will search for the device. After the device is found, click the connect button in the app. VI. Choose the network you want the device to use (Only supports 2.4G networks), click continue. VII.
Application Playback： Your device list will show all available zones. Press a zone to see the information on the current source. While on the view for the source, swipe right to reveal the available sources. From there, you can select what source you want to hear next, or swipe left to return to the currently playing source. Streaming from cell phone memory/online Music Services： These screens let you access your available music.
Device Settings： Through device settings you can get technical informtion on your speaker, or rename it. (Note - Speaker info can confirm the firmware version.) -Rename 1. Click “Gear” icon. 2. Click “Rename”. 3. Click “Custom…”. 4. Enter new name of the device and Click “Confirm”. 5. Click “Finish”, Complete the Rename. (Note - If there is an updated name and then initialize the device, the SSID will be changed to the last custom name plus the serial number of the product.
Firmware update： Device will notify in your application when there is a new firmware version available. It’s recommended to update firmware whenever available as this might not only correct bugs improve security. -Update process 6. Click “NEW” icon. 7. Click “Upgrade”. 8. Don’t turn off the power, the device will update automatically. (Note - Speaker info can confirm the firmware version.) FCC WARNING This device complies with part 15 of the FCC Rules.
Device Specification： Wireless Network IEEE 802.11 b/g/n 2.4GHz Ethernt Single 10/100Mbps RJ45 Power Input 5V@1A microUSB input Audio Output Analog 3.5mm mini Jack Frequency Response 20Hz – 20KHz Audio Input Digital : S/PDIF optical Analog : 3.
