User's Manual

Audio input
Audio output
5V micro USB power
Bluetooth goes into discovery mode by default after power on.
ID: Music BT
BT: Quick flash when in
discovery mode. Slow flash
when a BT device (e.g cell
phone) is connected.
Volume +
Volume -
Mute
Pairing
5V micro USB charge
On
Off
Audio output
Pairing
Charging
Full Charge
TX/RX Pairing Button.
Step 1
Press the Pairing button
on the transmitter.
The TX LED stars to flash
twice per second. This
indicates the device is
waiting for a Receiver to
connect.
Step 2
Within 10 seconds, press the
pairing button on a Receiver. The
Pairing LED on the TX will
become constantly lit. This indicate
the receiver connection succeed.
When connected with the TX, the
Pairing LED on the RX will flash
once every 2.5 seconds. At this
state, audio from the TX can be
streamed to the RX.
Step 3
Repeat step 1 and 2.
One Transmitter can be
paired with up to 4
receivers.
2.4GHz Wireless Audio
System User Manual
Wireless audio transmission quality: 44.1kHz CD quality with Texas Instruments
PPW
TM
point-to-point connection technology.
Wireless distance: 30 meters open site.
Avoid to use in a overly complex 2.4GHz wireless environment.
Bluetooth: v4.2 with Qualcomm aptX, distance over 10 meters.
Number of devices: one transmitter pair up to 4 receivers.
Receiver charging time: 1 hour charging run for 8 hours.
Transmitter
Receiver
Pairing Transmitter and Receivers
Specifications
Pairing: TX/RX pairing
status. Flashing: waiting for
pairing. Lit: RX connected.