User's Manual

ManualsBrandsTen Tronics ManualsElectronicsUSB powered Wireless IR Repeater Dongle

Bi‐DirectionalWirelessIRRepeaterSystemUserGuide

PRODUCT FEATURES:

1. It works not only as a IR Repeater but also works as a wireless IR Extender

2. Radio Frequency (RF): 915 MHz

3. RF working Range up to 100+ meters in Open Space.

4. IR carrier tuning freq.: 20~ 60KHz

5. Compliant with CE/FCC EMC regulation

6. High receiving sensitivity (-90dBm).

7. Bi-Directional full band IR Control

8. Channel Pairing.

SPECIFICATIONS

IR:

1. Compatible with all Universal full band carrier frequency infrared Remote (20KHz to 60KHz)

2. Better IR receive sensitivity (distance), over 7 meters

RF:

1. Long range RF transmission over 100+ meter in open space

2. Use 915MHz RF technology to avoid interference in crowded 433MHz RF activities

3. Bi-Directional full band IR Control

4. FSK modulation:

 Better signal sensitivity than ASK modulation

 Better Anti RF-interference than ASK modulation

 Better performance in noise suppression

5. Digital data encryption function ensures safety and reliability

6. Support:

 One receiver to one transmitter. (Point to Point)

 One receiver to multi transmitters, (Point to Group)

 Multi receivers to one transmitter. (Group to Point)

 Multi receivers to multi transmitters. (Group to Group)

7. Channel Pairing/ Channel addressable grouping

Kits Includes:

IR Emitter cable IR Target cable 2x Bi-Directional Wireless USB IR Dongle User manual

Single Dual

USB powered Wireless IR Repeater Dongle

A-1410K

Ten-Tronics

Summary of content (6 pages)

PAGE 1
USB powered Wireless IR Repeater Dongle A-1410K Ten-Tronics Bi‐Directional Wireless IR Repeater System User Guide PRODUCT FEATURES: 1. It works not only as a IR Repeater but also works as a wireless IR Extender 2. Radio Frequency (RF): 915 MHz 3. RF working Range up to 100+ meters in Open Space. 4. IR carrier tuning freq.: 20~ 60KHz 5. Compliant with CE/FCC EMC regulation 6. High receiving sensitivity (-90dBm). 7. Bi-Directional full band IR Control 8. Channel Pairing. SPECIFICATIONS IR: 1.
PAGE 2
Bi‐Directional Wireless IR Repeater System User Guide Applications IR Repeater Addressable Control Broadcasting Control Bi-Directional Control Installation steps: Application1: Single dongle IR Repeater (without RF) Step1: Connect with the power Place the dongle (one piece of wireless USB IR Dongle) on the USB power adaptor. OR place the dongle (wireless USB IR Dongle) to the USB jack in back of an home equipment (TV, CD, etc.).
PAGE 3
Bi‐Directional Wireless IR Repeater System User Guide Plug-in the IR target cable to the “IR TARGET” of the dongle that receive IR signals from the Remote Control. Plug-in the IR emitter cable to the “IR EMITTER” of the dongle that is near the devices you want to control Step3.
PAGE 4
Bi‐Directional Wireless IR Repeater System User Guide dongles as how many groups that are needed for setup. They may not be in the same room. Place the other dongles at Clint sides, near the devices you want to control. Multiple dongles for multiple rooms. Connect the dongles with USB power adaptors, or insert the dongle (wireless USB IR Dongle) to the USB jack in the back of a device.
PAGE 5
Bi‐Directional Wireless IR Repeater System User Guide signals that is received via the RF from the other room. Power on and enjoy. Trouble Shooting Case Phenomena Description 1 Trouble shoot The distance between remote control and Please make sure the battery in the remote IR Receiver is short (perhaps less than 5 control is sufficient. (Because the working Meters) distance between IR Receiver and remote control is determined by the IR signal power of your remote controller.
PAGE 6
Bi‐Directional Wireless IR Repeater System User Guide Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.