User's Manual

In-Wall Bluetooth Music Receiver

Specifications & Features

 Audio Inputs :Bluetooth receiver or stereo audio line level .

 Audio source select: AUX automatically turn ON when plugged into the AUX port.

 Audio output: Stereo audio phone jack or 3-pin Screw terminal.

 Power input(5VDC): Power jack or 3-pin Screw terminal.

 Stereo audio output: For connection to any speaker system.

 Bluetooth version: 3.0 EDR compliant.

 Bluetooth receive Distance:10 Meters.

 Power source:5VDC/1A

Bluetooth Blue LED Status :

 Pairing mode: 1s on/off flash 1 times

 Linked mode: Always on

 AUX mode: LED off

How about use button to pairing :

§ Press button 3 seconds to boot, press button 3 seconds to off.

§ The first pairing, hold down button 5 seconds to make the Bluetooth pairing boot.

§ The pairing timeout limit is 90 seconds.

§ If pairing timeout, you need hold down button 1 second to re-pairing.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from thatto which the receiver is

connected.

 Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate this equipment.

PAGE 1
In-Wall Bluetooth Music Receiver Specifications & Features  Audio Inputs :Bluetooth receiver or stereo audio line level .  Audio source select: AUX automatically turn ON when plugged into the AUX port.  Audio output: Stereo audio phone jack or 3-pin Screw terminal.  Power input(5VDC): Power jack or 3-pin Screw terminal.  Stereo audio output: For connection to any speaker system.  Bluetooth version: 3.0 EDR compliant.  Bluetooth receive Distance:10 Meters.
PAGE 2
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.