Instruction Manual

INSTRUCTION MANUAL

Please keep reading the following safety notes before use or examination.

i) Product description.

1. This product is a component that can detect the environment

temperature,humidity,atmospheric pressure,etc,and then send the detected information

to the server through biuetooth access to the network.

2. Based on DMI-WP-TAG-

001;S001CE0300001;DMTGWPWMBTXX;DMANWPWMBTXX ,this product adds the

infrared sensor and light sensor of human body,as well as the DMIMING dimmer that

controls the LED lamp. For example,when someone is detected and the ambient light is

dark,the corresponding LED lamp will be adjusted to the corresponding brightness.

3. :FOR INDOOR USE ONLY.

4. This product is used for internal temperature meaurement in office.

Ii).Warning.

1. If the device is connected to a voltage beyond a specified range(e.g.380V),it will

caused damage to the device.

2. If the equipment is used in a manner not specified by the manufacturer,the protection

provided by the equipment may be damaged.

PAGE 1
INSTRUCTION MANUAL Please keep reading the following safety notes before use or examination. i) Product description. 1. This product is a component that can detect the environment temperature,humidity,atmospheric pressure,etc,and then send the detected information to the server through biuetooth access to the network. 2.
PAGE 2
ii) Technical parameter. Supplier's Declaration of Conformity 47 CFR § 2.1077 Compliance Information Model: DMI-WP-TAG-001;S001CE0300001;DMTGWPWMBTXX;DMANWPWMBTXX Product name: PRECISION ANCHOR；PRECISION TAG Suppliers Name: DMI, LLC Suppliers Address (USA) ：850 White St, Dubuque, IA 52001-7035, US Suppliers internet contact: www.precisionreality.com FCC Compliance Statement: This device complies with Part 15 of the FCC Rules.
PAGE 3
supply.The fire line of the mains power supply shall be equipped with a switch of no less than 10A/25V. v)Operation instruction. The Bluetooth chip detects the ambient temperature and humidity via IC2 or IC4,and then uploading to the server via the Bluetooth network. vi).Equipment mainten ance and service. 1.Check whether the indicator light of the device is on or the Bluetooth is enabled to determine whether the device is working. 2.Maintenance of equipment.
PAGE 4
—Consult the dealer or an experienced radio/TV technician for help.