Instruction Manual

INSTRUCTION MANUAL

Please keep reading the following safety notes before use or examination.

i). Product description.

1. This product is a component that can detect the environment temperature,

humidity, atmospheric pressure, etc., and then send the detected information

to the server through bluetooth access to the network.

2. :FOR INDOOR USE ONLY.

3.This product is used for internal temperature measurement in office.

ii). Warning.

1.enquipment shall not be installed in air ducts specifically fabricated for

environmental air;enquipment intended for use in spaces used for

environmental air,such as the space over a hung ceiling used for

environmental air-handling purposes,is required to be provided with a metal

enclosure or with a non-metallic enclosure having adequate fire-resistance and

low smoke-producing characteristics.Determ in ation of low-smoke-producing

characteristics is made in accordance with the Standard for Fire Test for Heat

and Visible Smoke Release for Discrete Products and Their Accessories

Installed in Air-Handling Spaces,UL 2043.

2.If the device is connected to a voltage beyond a specified range (e.g. 380V),

it will cause damage to the device.

3.If the equipment is used in a manner not specified by the manufacturer,the

protection provided by the equipment may be damaged.

4.This device complies with Part 15 of the FCC Rules.Operation is subject to

the following two conditions: (1) this device may not cause harmful

i n t er f er e n c e, a nd (2 ) th i s de v i c e m u s t a c c e p t a n y i n t e r f e r e n c e

received,including interference that may cause undesired operation.

5.Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

6.NOTE: This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

PAGE 1
INSTRUCTION MANUAL Please keep reading the following safety notes before use or examination. i). Product description. 1. This product is a component that can detect the environment temperature, humidity, atmospheric pressure, etc., and then send the detected information to the server through bluetooth access to the network. 2. :FOR INDOOR USE ONLY. 3.This product is used for internal temperature measurement in office. ii). Warning. 1.
PAGE 2
7.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.
PAGE 3
2. When something goes wrong with the product, if you can't fix it yourself, send it back. 3. If the product is damaged, please send it back. Manufacturer name: Ten Pao Industrial Ltd. Address: Room 10-12,6/F.,Kwong Sang Hong Centre 151-153 Hoi Bun Road, Kwun Tong, Kowloon Hong Kong.