User's Manual

ManualsBrandsTeltronic ManualsElectronicsBSR75 Digital RF transceiver

BSR75 USER AND INSTALLATION MANUAL

01.01.00/1 Rev.1

PRODUCT:

BSR75

CODE:

D138X61PT_DDS06

VERSION:

REVISION:

DATE:

14-Sept-2016

CLASSIFICATION:

General information Internal document

DOCUMENT MAINTENANCE

THIS DOCUMENT HAS 17 PAGES

EDIT. DATE AUTHOR DESCRIPTION

1.0 15-Jul-2009 Javier Córdova First edition.

1.1 05-Aug-2010 A. Narvaiza Changes in frequency bands: 409-430 MHz

2.0 04-May-2012 Javier Córdova New frequency band: 763-806 MHz.

Code and minor editorial changes.

Changes in section 4.

3.0 13-Nov-2012 A. González Addition of labelling information.

3.1 19-Dec-2012 A. González FCC RF Exposure Requirements updating.

3.2 28-Jul-2016 C. Casanova

Disclaimer updated

Removed 50 ohms load

Nominal voltage to 27.4 Volts

3.3 14-Sept-2016 C. Casanova Changes in equipment label

3.4 27-Sept-2016 C. Casanova Changes in section 5 and 10

DOCUMENT APPROVAL

ACTIVITY NAME DATE SIGNATURE

Prepared

Revised

Project Manager

Approved

R&D Director

Summary of content (21 pages)

PAGE 1
BSR75 USER AND INSTALLATION MANUAL PRODUCT: CODE: BSR75 D138X61PT_DDS06 VERSION: 03 CLASSIFICATION: REVISION: 03 DATE: 14-Sept-2016 General information Internal document DOCUMENT MAINTENANCE THIS DOCUMENT HAS 17 PAGES EDIT. DATE AUTHOR DESCRIPTION 1.0 15-Jul-2009 Javier Córdova 1.1 05-Aug-2010 A. Narvaiza 2.0 04-May-2012 Javier Córdova 3.0 13-Nov-2012 A. González Addition of labelling information. 3.1 19-Dec-2012 A. González FCC RF Exposure Requirements updating. 3.
PAGE 2
BSR75 USER AND INSTALLATION MANUAL Code: D138X61PT_DDS06 Date: 14-09-16 Page: 2 of 21 PowerTrunk Inc. is the subsidiary of Teltronic S.A.U. responsible for business development, distribution and customer support for Teltronic’s Land Mobile Radio products in North America. The company is headquartered in New Jersey. Teltronic S.A.U. distributes the same products for Land Mobile Radio under different trademarks and brand names in other regions of the world.
PAGE 3
BSR75 USER AND INSTALLATION MANUAL Code: D138X61PT_DDS06 Date: 14-09-16 Page: 3 of 21 CONTENTS: 1. INTRODUCTION......................................................................................................... 4 2. UNPACKING AND CHECKING .................................................................................. 5 3. PREVIOUS CONSIDERATIONS................................................................................. 5 4.
PAGE 4
BSR75 USER AND INSTALLATION MANUAL Code: D138X61PT_DDS06 Date: 14-09-16 Page: 4 of 21 1. INTRODUCTION The BSR75 is a digital RF transceiver with a transmitter output power of 75 W. It is manufactured following a robust mechanical modular design which allows simple and economic maintenance.
PAGE 5
BSR75 USER AND INSTALLATION MANUAL Code: D138X61PT_DDS06 Date: 14-09-16 Page: 5 of 21 2. UNPACKING AND CHECKING The following elements are supplied in the box: BSR75 Power Supply Cable Maintenance Cable Two Ethernet Cables The equipment is supplied with all the modules already assembled in the rack. The modules in the basic configuration are: Power Supply module (RPS), Power Amplifier (RPA75), Transmitter (RTX75), Receiver (RRX) and Control (RCPU).
PAGE 6
BSR75 USER AND INSTALLATION MANUAL Code: D138X61PT_DDS06 Date: 14-09-16 Page: 6 of 21 The equipment has been designed to fulfil the applicable compliance regulations. The equipment complies with the applicable Parts of the FCC Title 47 of the Code of Federal Regulations and Industry Canada (IC) RSS-119 Standard. This device complies with part 15 of the FCC Rules and Industry Canada ICES003.
PAGE 7
BSR75 USER AND INSTALLATION MANUAL Code: D138X61PT_DDS06 Date: 14-09-16 Page: 7 of 21 In any case, take the following points into consideration: ! q Most electronic equipments are susceptible to electromagnetic interference if they are not duly protected. If the BSR75 is placed near unprotected electronic devices, they may malfunction. q The BSR75 must not transmit without its antenna connected.
PAGE 8
BSR75 USER AND INSTALLATION MANUAL Code: D138X61PT_DDS06 Date: 14-09-16 6. EQUIPMENT DESCRIPTION 6.1. FRONT VIEW 1 7 2 3 4 1.- RPS (Repeater Power Supply). 2.- RPA75 (Repeater Power Amplifier). 3.- RTX75 (Repeater Transmitter). 4.- RRX (Repeater Receiver). 5.- BSYNC (BSR75 Synchronism) - OPTIONAL 6.- RCPU (Repeater Control Processing Unit). 7.- Power Supply switch. 01.01.00/1 Rev.
PAGE 9
BSR75 USER AND INSTALLATION MANUAL Code: D138X61PT_DDS06 Date: 14-09-16 6.2. REAR VIEW 17 18 19 20 16 15 14 21 13 22 23 12 24 11 10 9 8.- Power Supply Connector. 9.- TX Antenna Connector (type N). 10.- RF cables between RTX75 and RPA75. 11.- RX Antenna Connector (type BNC). 12.- RX Diversity Antenna Connector (not used). 13.- BSYNC Connectors (not used). 14.- Ethernet Connector “ETHERNET_A”. 15.- Ethernet Connector “ETHERNET_B”. 16.- Synchronism Output Connector “SYNC_OUT_2”. 17.
PAGE 10
BSR75 USER AND INSTALLATION MANUAL Code: D138X61PT_DDS06 Date: 14-09-16 Page: 10 of 21 6.3. MODULES 1.- RPS75 (REPEATER POWER SUPPLY) LEDs to indicate module status. LED TYPE SUPPLY Green NORMAL STATUS On 26.4V Green On 13.2V Green On FUNCTIÓN There are 27.4V at the RPS75 input There are 27.4V at the RPS75 output There are 13.2V at the RPS75 output Power Supply switch (Ref. 7): ON/OFF switch to connect to and disconnect from the BSR75. 2.
PAGE 11
BSR75 USER AND INSTALLATION MANUAL Code: D138X61PT_DDS06 Date: 14-09-16 Page: 11 of 21 4.- RRX (REPEATER RECEIVER) LEDs to indicate module status. ON LED TYPE Green NORMAL STATUS FUNCTIÓN On Power supply correct REF. ERROR Red Off Failure in the 10 MHz reference INT. ERROR Red Off Internal failure BBSR ERROR Red Off Communication failure with the RCPU module 5.- SLOT OPTION: BSYNC (BSR75 SYNCHRONISM) LEDs to indicate the status of option BSYNC. LED ON REF.
PAGE 12
BSR75 USER AND INSTALLATION MANUAL Code: D138X61PT_DDS06 Date: 14-09-16 Page: 12 of 21 6.- RCPU (REPEATER CONTROL) LEDs to indicate the module status. LED ON REF. ERROR INT.
PAGE 13
BSR75 USER AND INSTALLATION MANUAL Code: D138X61PT_DDS06 Date: 14-09-16 Page: 13 of 21 7. INSTALLATION GUIDE The following recommendations must be followed closely before starting up the BSR75 module. 7.1. LOCATION The BSR75 has been designed in the standard format of 19” / 3 units high and it must be installed in cabinets with this format. The BSR75 site must be permanent, well-ventilated and without vibrations. 7.2.
PAGE 14
BSR75 USER AND INSTALLATION MANUAL Code: D138X61PT_DDS06 Date: 14-09-16 Page: 14 of 21 7.3. ANTENNA CONNECTION q Choose the most adaptable antenna for the installation. The antenna must have an impedance of 50 ohms to the equipment transmission frequency. Install the antenna in accordance with the manufacturer’s instructions. q Use a coaxial cable, avoiding as much as possible large cable lengths. Cable impedance is 50 ohms. q Measure the VSWR of the installation.
PAGE 15
BSR75 USER AND INSTALLATION MANUAL Code: D138X61PT_DDS06 Date: 14-09-16 Page: 15 of 21 8. CONFIGURATION A BSR75 is configured via an NMS (Network Management System). To configure the BSR75, consult the NMS manual. 9. INCIDENTS The repeater must be repaired by authorized technical personnel only. If a BSR75 failure occurs, the entire BSR75 must be replaced. If transmitter module is damaged and there is not an entire BSR75 available to replace, set RTX75 and RPA75 modules previously calibrated jointly.
PAGE 16
BSR75 USER AND INSTALLATION MANUAL OFF REF. ERROR ON INT. ERROR ON BBSR ERROR ON RPA75 ERROR ON RPW ERROR ON ON OFF REF. ERROR ON INT. ERROR ON BBSR ERROR ON ON OFF REF. ERROR ON TIME GPS ON PPS GPS OFF BSYNC RRX RTX75 ON TIME LOCAL OFF PPS LOCAL OFF 01.01.00/1 Rev.1 Code: D138X61PT_DDS06 Date: 14-09-16 Page: 16 of 21 Internal power supply failure. Contact Technical services. Failure in the 10MHz reference. Contact Technical services. Internal failure.
PAGE 17
BSR75 USER AND INSTALLATION MANUAL ON REF ERROR INT ERROR BBSR ERROR RCPU DIV ERROR CNC ERROR RX ETH LINK1 ETH LINK2 ETH RX ETH TX 01.01.00/1 Rev.1 Code: D138X61PT_DDS06 Date: 14-09-16 Page: 17 of 21 Internal power supply failure. Contact Technical Services. Failure in the 10MHz reference. Check that the BSYNC ON module is installed or that the SYNC IN cable is correctly connected. Contact Technical services if still unsolved. ON Internal failure. Contact Technical Services.
PAGE 18
BSR75 USER AND INSTALLATION MANUAL Code: D138X61PT_DDS06 Date: 14-09-16 Page: 18 of 21 10. ANNEXE MANUEL D’UTILISATEUR ET D’INSTALLATION DE LA BSR75 GESTION DES DÉCHETS L'apposition de ce symbole signifie que l'appareil doit faire l'objet d'une collecte sélective à la fin de son cycle de vie. Ne pas déposer les produits dans des décharges municipales sans les avoir triés.
PAGE 19
BSR75 USER AND INSTALLATION MANUAL Code: D138X61PT_DDS06 Date: 14-09-16 Page: 19 of 21 INTRODUCTION Ce manuel est commun à tous les modèles de l'équipement, quels qu'en soient les options et accessoires installés. Le fonctionnement approprié de tout équipement électronique dépend de sa bonne manipulation. Pour ce faire, il est préconisé de suivre les instructions de ce manuel.
PAGE 20
BSR75 USER AND INSTALLATION MANUAL Code: D138X61PT_DDS06 Date: 14-09-16 Page: 20 of 21 EXIGENCES DE L'EXPOSITION RF: ATTENTION: L'antenne(s) utilisée(s) pour ce transmetteur ne doit pas être co-localisées ou fonctionner en conjonction avec aucun autre antenne ou transmetteur. L’Antenne(s) utilisée(s) pour ce transmetteur ne doivent pas dépasser un gain d'antenne de 20 dBi et être située à au moins 525 cm, loin de toute personne(s) afin de se conformer aux exigences de la FCC et de l’IC .
PAGE 21
BSR75 USER AND INSTALLATION MANUAL Code: D138X61PT_DDS06 Date: 14-09-16 Page: 21 of 21 branchée. 01.01.00/1 Rev.1 q Manipuler l'unité BSR75 avec soin. Cet équipement est pourvu d'arêtes qui peuvent être à l'origine de coupures en cas de mauvaise manipulation. q La maintenance et la réparation de cet équipement doivent être prises en charge par du personnel qualifié.