Miroir M800S M700S Projector Projector Quick Start Guide
M700S Projector Your Miroir M800S AA CB D C BD E H H J I J I 2 K F E G A Audio Out (3.5mm) - (Optional) Connect an external speaker or headphones. B USB Media Reader Jack – Plug a USB stick into the port and play movies, or share pictures. C HDMI Video Input - Connect an HDMI cable to a device that supports HDMI video output. D Reset Button E Power Port - Connect included AC Adapter for power. DC In - 19VDC@3.
Remote Control r your phone’s A Connecting Your Projector with a Cable D Connect To Your Laptop HDMI A Power Connect To Your Device B Main Screen HDMI Cable (Included) USB-C Digital AV Multiport Adapter (not included) HDMI Cable (Included) IMPORTANT! Not all USB – C cables will support video.
Connecting Your Projector Wirelessly WIFI • Connect the M700S 800 to your WIFI network. Open Settings, and select WIFI and follow the instructions. Troubleshooting The image is blurry • Update the projector if prompted • Adjust the projected image’s focus using the remote under settings. • Check that the surface you are projecting on is smooth and non-reflective. • Check that the projector’s lens is clean and free of debris.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.