User's Manual

ManualsBrandsTelson Information and Communications ManualsElectronics14 Channel Family Radio Services

Bellsouth feature list

General Feature

14 Channel 38 CTCSS

16 Step Digital Up/Down Volume Control with Level Display with Beep

Channel Select Up/Down Button with Beep

4 Digit LCD Display for Channel

Audible Low Battery Warning beep with LCD blinking

Battery level

Key Lock

TX LED (RED) indicator

AAA x 4 Battery operation

Over 2 Miles

500mW output power

Over 30hours operation

Channel Scan operation

Tone Scan operation

Light operation

Vox

Key Assignment

PTT

Monitor

Single Audible Beep Call

Power On/Off

Up for Volume & Channel change

Down for Volume & Channel change

Light / Key Lock

Scan

Feature Description

Power On

The radio begins operation with beep tone by pressing and holding button for 1000msec and

LED back light is illuminated for 6 second simultaneously and the LCD displays all ICONs to

check the screen for 100msec

Power OFF

Press and hold the Power Key for 2000msec. Then the units is off with long audible Beep(

800Hz)

Summary of content (6 pages)

PAGE 1
Bellsouth feature list General Feature 14 Channel 38 CTCSS 16 Step Digital Up/Down Volume Control with Level Display with Beep Channel Select Up/Down Button with Beep 4 Digit LCD Display for Channel Audible Low Battery Warning beep with LCD blinking Battery level Key Lock TX LED (RED) indicator AAA x 4 Battery operation Over 2 Miles 500mW output power Over 30hours operation Channel Scan operation Tone Scan operation Light operation Vox Key Assignment 1. PTT 2. Monitor 3. Menu 4.
PAGE 2
Bellsouth feature list PTT PTT Button company following functions. - Get user to talk by the button. – Return to basic mode from Programmable CH/Tone change mode External PTT The set could transmit by External PTT key PTT Transmission Press the PTT key for transmission, speak slowly and clearly in a normal voice about 2 ~ 3 inchs away from microphone the radio transmits the signal and TX LED (RED) is on at the moment.
PAGE 3
Bellsouth feature list Tone select Press the Menu button two times. The tone digits are blinking and then press up and down key to a wanted tone. The release of tone selecting mode is to press one of following. 1.Menu, 2. PTT, 3. Call, 4. Time out (after 4sec ), 5.Lamp/Key Lock. It returns to stand-by condition. When the radio is power off and on again , the selected tone is recalled. If press and hold Up/Down key for 200msec, tone changes upward or downward repeatedly.
PAGE 4
Bellsouth feature list Back light ON/Off Pressing Light /Key lock Button for 3sec, the LCD light is on 6 sec and then off automatically. It turns to off (on) in on (off) status. Key Lock On/Off If press Light/Key lock button above 3sec, Key icon on LCD is displayed and set up Lock key on Option. And if press Light/key lock button above 3sec, Key icon on LCD is disappeared and set up Lock Key On Option. It is stored also in replacing Battery.
PAGE 5
Bellsouth feature list Power Saving So as to maximize battery life, Power Saving Mode is automatically activated in 3sec after every transmission and reception like following operation The beginning of power saving is following. The 3sec process of Power On The 3sec process of stopping transmission.
PAGE 6
Bellsouth feature list SAFETY INFORMATION Your wireless hand-held portable transceiver contains a low power transmitter. When the Pust-to-Talk (PTT) button is pushed it sends out radio frequency (RF) signals. The device is authorized to operate at a duty factor not to exceed 50%. In August 1996, the Federal Communications Commissions(FCC) adopted RF exposure guidelines with safety levels for hand-held wireless devices.