User's Manual

ManualsBrandsTelson Information and Communications ManualsElectronics14 Channel Family Radio Services

Bellsouth feature list

General Feature

14 Channel NO CTCSS

16 Step Digital Up/Down Volume Control with Level Display with Beep

Channel Select Up/Down Button with Beep

2 Digit LCD Display for Channel / FM frequency

Audible Low Battery Warning beep with LCD blinking

Key Lock

TX LED (RED) indicator

AAA x 4 Battery operation

Over 2 Miles

500mW output power

Over 30hours operation

Scan operation

Light operation

Key Assignment

PTT

Monitor

Single Audible Beep Call

Power On/Off

Up for Volume & Channel change

Down for Volume & Channel change

Light / Key Lock

Scan

Feature Description

Start

When changing batteries, start mode become Power OFF automatically

In start mode, channel and volume become Default Value ( CH 1, Volume 9 )

Power On

Press and hold the POWER key for (1.5) seconds to power on with Beep and LCD will be on.

It is in the RX Stand-by Mode. Back-light displays for (5) seconds.

Power OFF

Press and hold the Power Key for (0.5) seconds to power-off with Beep4 at the RX Standby

Mode.

Summary of content (5 pages)

PAGE 1
Bellsouth feature list General Feature 14 Channel NO CTCSS 16 Step Digital Up/Down Volume Control with Level Display with Beep Channel Select Up/Down Button with Beep 2 Digit LCD Display for Channel / FM frequency Audible Low Battery Warning beep with LCD blinking Key Lock TX LED (RED) indicator AAA x 4 Battery operation Over 2 Miles 500mW output power Over 30hours operation Scan operation Light operation Light operation Key Assignment 1. PTT 2. Monitor 3. Menu 4. Single Audible Beep Call 5.
PAGE 2
Bellsouth feature list MENU KEY STAGE 0 : VOLUME CHANGE STAGE 1 : CHANNEL CHANGE STAGE 2 : VOX MODE ON / OFF Deactivate Menu Mode 1. Menu Button Push 2. PTT Key Push 3. Call Key Push 4. Time Out 5. Scan Key Push Menu Mode STAGE 0 Press the UP/DOWN key to control the volume in Normal Mode Volume control 1.Press the Up/Down key to increase /decrease the volume level from level 1 to level 8 2.For Repeat Mode Press the Up/Down key for more than (1.0) seconds 3.
PAGE 3
Bellsouth feature list EXTERNAL PTT Transmit without using PTT Key as below 1. External Speaker Mike 2. External VOX On INTERNAL VOX When Internal VOX Mode is on, VOX Sensibility level is controlled from 1 to 3 by Menu Key While VOX Mode is on , VOX Icon is indicated on LCD Call Function Press and release the Call key for about (3) seconds to transmit an audible Call Tone. The unit rings automatically returns to receive/stand-by mode when the Call transmission is over.
PAGE 4
Bellsouth feature list Scan Function The Scan activity is working in an endless channel loop from 1 to 14 Press Scan Key to activate channel scan 1. check the detected channel by the 200msec 2. Scan Icon symbol is on the LCD. 3. Resume time keeps for 4 seconds 4. When an active signal is detected , Scan is paused keeping the active signal broadcasted. Operate PTT or external PTT .
PAGE 5
Bellsouth feature list equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: " " " " Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is needed.