EFLINKM1002X User Manual Passion for Wireless World EFLINKM1002X User Manual Confidential Material: This document contains information that is proprietary and confidential, reading and copying this document is prohibited without permission from AsiaTelco Technologies Co. AsiaTelco Technologies Co.
EFLINKM1002X User Manual Index 1. About this Manual............................................................................ 5 2. Product Overview............................................................................. 5 3. Definition of buttons and OLED Screen .................................... 5 3.1 Buttons Definition ................................................................. 5 3.2 OLED Screen ......................................................................... 5 4.
EFLINKM1002X User Manual 4.5.2 Connected Devices ................................................................. 17 4.5.3 Network Activity .................................................................... 18 4.5.4 Custom Firewall Rules ........................................................... 18 4.5.5 Port Filter ............................................................................... 20 4.5.6 Port Forwarding ..................................................................... 22 4.5.
EFLINKM1002X User Manual 4.9.2 Configuration Management ................................................... 33 4.9.3 Software Upgrade .................................................................. 34 4.9.4 Reboot Router ........................................................................ 35 4.9.5 Power Off Router ................................................................... 35 4.9.6 Time Setting ........................................................................... 36 5.
EFLINKM1002X User Manual 1. About this Manual The content of this User Manual has been made as accurate as possible. However, due to continual product improvements, specifications and other information are subject to change without notice. 2. Product Overview Congratulations on your purchase of this product. This MiFi supports Band 38， Band40，Band 41; it can be operated on Linux, Windows and MAC system PC.
EFLINKM1002X User Manual 4.1 Login Open Web browser and enter 192.168.0.1, login window will pop‐up. Input the following username and password. Username/Password: admin. Figure 4‐1‐1 Login After successful login, you can see the “Welcome” page, here you can choose “Quick Setup” in order to set up the router step by step as the system guides （refer to chapter 4.2）, select “Skip” to enter the main interface of the router （refer to chapter 4.
EFLINKM1002X User Manual Figure 4‐1‐2 Quick Setup 4.2 Quick setup 4.2.1 User settings From this page, you can modify the router’s password, and then click “Next” to enter the “Internet Connection” setting page. Figure 4‐2‐1‐1 User Settings 4.2.2 Internet Connection From this page, you can configure the Internet connection mode, refer to the following options: AsiaTelco Technologies Co.
EFLINKM1002X User Manual My Internet Connection is ：Cellular/Disabled.
EFLINKM1002X User Manual Figure 4‐2‐2‐2 Default Primary PDP 4.2.3 Wireless Settings After you finish configuring the Internet connection, Click "Next" to enter the wireless settings interface. Here, you can configure the wireless network settings, including the wireless network name, network status, and wireless security.
EFLINKM1002X User Manual Figure 4‐2‐3‐1 Wireless Settings 4.2.4 Device Placement Guidelines Figure 4‐2‐4‐1 Device Placement Guidelines Continue clicking "Next" to enter the “Device Placement Guidelines” page. It is recommended that you do not place your wireless router near a Microwave, Home Cordless Phone, a Baby Monitor, Bluetooth devices (such as a headset or a Bluetooth keyboard or a Bluetooth mouse) and any other wireless network devices.
EFLINKM1002X User Manual 4.3 Dashboard The main interface includes seven sections: Dashboard, Internet, Home Network, Wireless and Router. You can manage the router configuration through the menu page, and modify the parameters according to your needs. From “Dashboard” page, you can learn Cellular Connection, router information, software information, home network and so on. Figure 4‐3‐1 Dashboard AsiaTelco Technologies Co.
EFLINKM1002X User Manual Figure 4‐3‐2 Dashboard 4.4 Internet Click “Internet” option, the page redirects to the following page, including Internet Connection, Traffic Statistics, PIN Management and Manual Network. Figure 4‐4‐1 Internet AsiaTelco Technologies Co.
EFLINKM1002X User Manual 4.4.1 Internet Connection Click on “Internet Connection”, you can configure the “Internet Connection” settings here (please refer to chapter 4.2.2), you should click “Save” to save all changes. 4.4.2 Traffic Statistics Traffic Statistics displays the number of packets sent by your router. Figure 4‐4‐2‐1 Traffic Statistics 4.4.3 PIN Management Click “PIN Management” to turn to the PIN management interface.
EFLINKM1002X User Manual Figure 4‐4‐3‐1 PIN Management Figure 4‐4‐3‐2 PIN Enabled AsiaTelco Technologies Co.
EFLINKM1002X User Manual 4.4.4 Manual Network Figure 4‐4‐4‐1 Manual Network Click “Manual Network”, you can see the manual network page. You can set the scan network mode, LTE background scan network time, click “Save” to take effect. Manual Network: Click the “Manual Scan Network” button, it would take you more than 1min to scan the PLMN, you can choose the PLMN you want to attach in the PLMN list, if failed, the prompt said timeout would be pop‐up.
EFLINKM1002X User Manual 4.5 Home Network The “Home Network” page includes DHCP Settings, Connected Devices, Network Activity, Custom Firewall Rules, Port Filter, Port Forwarding and Firewall Settings. Figure 4‐5‐1 Home Network 4.5.1 DHCP settings Clicking on the header of the “DHCP Settings” tab will take you to the “DHCP Settings” header page. There displays DHCP Settings and the IP address that allows you to define.
EFLINKM1002X User Manual Add Static IP：Bind IP and MAC, the rules will display in the list, you can delete or continue adding the rules; DHCPV6 Server：Stateless Server（default）/ Stateful Server. Figure 4‐5‐1‐1 Add Static IP Figure 4‐5‐1‐2 Static IP list 4.5.2 Connected Devices From the “Connected Devices” page, you can see the users’ Name, Status, IP Address, MAC Address, Connection and Connected time. AsiaTelco Technologies Co.
EFLINKM1002X User Manual Figure 4‐5‐2‐1 Connected Devices 4.5.3 Network Activity From the “Network Activity” page, you can know the access logs and the WiFi client access logs. Figure 4‐5‐3‐1 Network Activity 4.5.4 Custom Firewall Rules The custom firewall rules can be used to block the network traffic the using source IP address, source ports, destination IP address, destination ports or any combination of these parameters.
EFLINKM1002X User Manual Figure 4‐5‐4‐1 Custom Firewall Rules Page Click “Add Rule” to set the custom firewall rules. There will be the detail rules displayed in the list, you can delete or continue adding them. Rule name：Custom, ex.:123; Status：Enabled（default, correspond IP filter mode is Deny）/Disabled; Source IP Address：The user’s IP address that need to be set the rules, ex:192.168.0.
EFLINKM1002X User Manual Figure 4‐5‐4‐2 Add Rule Figure 4‐5‐4‐3 Custom Firewall Rules 4.5.5 Port Filter Click on “Port Filter” tab will take you to the “Port Filter” page. From this page, you can configure Trigger Port Range & Response Port Range to achieve Port Filter purpose. Default mode is disabled, click “Enabled” then you can click “Add Rule” button to set port filter rules. (Figure 4‐5‐6‐2).
EFLINKM1002X User Manual Port filtering open or close some ports, allowing users to use internal or partial ban on the use of Internet services Figure 4‐5‐5‐1 Port Filter Figure 4‐5‐5‐2 Port Filter Rule Name：Custom, ex:1234; Trigger Port： You can enter a range of service ports (the format is XXX‐YYY; XXX is the start port and YYY is the end port). Response Port：The port needs to be filtered in the range of (XXX‐YYY), Protocol：The protocol used for this application, TCP, UDP, or TCP&UDP.
EFLINKM1002X User Manual 4.5.6 Port Forwarding Click on “Port Forwarding” tab will take you to the “Port Forwarding” page. From this page, you can configure IP Address, Port Range to achieve Port Forwarding purpose. Default mode is disabled, click “Enabled” then you can click “Add Rule” button to set port forwarding rules. After the setup is completed, the rule details will be displayed in the list; you can delete or continue adding the rules.
EFLINKM1002X User Manual Rule Name：Custom, ex:1234; IP Address：The IP address of the PC running the service application. Port：You can enter a range of service ports(the format is XXX‐YYY; XXX is the start port and YYY is the end port). Protocol: The protocol used for this application, TCP, UDP, or TCP&UDP. Figure 4‐5‐6‐3 The Port Forwarding rule list 4.5.
EFLINKM1002X User Manual Figure 4‐5‐7‐1 Network Activity 4.6 PhoneBook You can create, delete phone book. Include ALL, Common, Family, Friends and Colleagues. Figure 4‐6‐1 PhoneBook Add：Click “Add” to enter Add new Phonebook page. Delete: Click “Delete” to delete the selected records. Figure 4‐6‐2 PhoneBook AsiaTelco Technologies Co.
EFLINKM1002X User Manual 4.7 SMS 4.7.1 Device Inbox In this page you can add, read, delete, copy& move messages in the Device Inbox. Figure 4‐7‐1‐1 Message New: Click “New” to enter message page Delete: Click ”Delete” to Delete the selected records Copy to SIM: Click ”Copy to SIM” to Copy the selected records to SIM Move to SIM: Click ”Move to SIM” to Move the selected records to SIM AsiaTelco Technologies Co.
EFLINKM1002X User Manual Figure 4‐7‐1‐2 Message 4.7.2 Device Outbox In this page you can add, delete, message in the Device Outbox. Figure 4‐7‐2‐1 Message New: Click “New” to enter message page Delete: Click ”Delete” to Delete the selected records AsiaTelco Technologies Co.
EFLINKM1002X User Manual 4.7.3 SIM SMS In this page you can add, read, delete, copy& move messages in the SIM. Figure 4‐7‐3‐1 Message New: Click “New” to enter message page Delete: Click ”Delete” to Delete the selected records Copy to SIM: Click ”Copy to Device” to Copy the selected records to Device Move to SIM: Click ”Move to Device” to Move the selected records to Device 4.7.4 Drafts In this page you can add, delete message in the Drafts Figure 4‐7‐4‐1 Message AsiaTelco Technologies Co.
EFLINKM1002X User Manual New: Click “New” to enter message page Delete: Click ”Delete” to Delete the selected records 4.7.5 SMS Settings This page includes SMS Save Location, SMS Over Mode, Center Number; you can configure the basic SMS settings. Figure 4‐7‐5‐1 Message SMS Save Location：Device(default)/SIM Cards SMS Over Mode：SMS Over CS（default）, SMS Over PS; Center Number: Will show different operators SMS center number 4.
EFLINKM1002X User Manual Figure 4‐8 Wireless Settings 4.8.1 Wireless Settings In this page, you can configure basic wireless settings. Click “Save” to take effect. Status：Enabled(default)/Disabled; 802.11 Mode：802.11n(b/g compatible )（default）, 802.
EFLINKM1002X User Manual 4.8.2 Wireless Security Settings Wireless Security Settings, refer to chapter 4.2.3. 4.8.3 WPS On this page, you can modify WPS settings. This feature can make your wireless client within a few minutes automatically synchronized with the AP settings and connect via WiFi. Figure 4‐8‐3‐1 WPS Push：Click “Push” to Connected WPS’s PBS, Then Mifi and wireless client will AsiaTelco Technologies Co.
EFLINKM1002X User Manual automatically complete the interaction and connect via WiFi if these two devices can match with each other. Enter PIN：Input the PIN code which got from wireless client and click “Apply” on this “WPS” configuration page. 4.8.4 Wireless MAC Filters This function is a powerful security feature that allows you to specify which wireless clients are not allowed. Default is disabled, click “Enabled” and then you can add MAC Filter rules. Mode Settings：Allow/Deny, default is deny.
EFLINKM1002X User Manual Figure 4‐8‐4‐2 Add MAC Filter Filter 4‐8‐4‐3 The MAC Filters 4.9 Router From this page, you can see User Management, Configuration Management, Software Upgrade, Reboot Router, Power Off Router and Time Setting. Figure 4‐9 Router AsiaTelco Technologies Co.
EFLINKM1002X User Manual 4.9.1 User Management On the “User Management” page, you can create, delete new account, click “Save” to take effect. The system shows the new account. Figure 4‐9‐1 Router 4.9.2 Configuration Management Figure 4‐9‐2‐1 Configuration Management AsiaTelco Technologies Co.
EFLINKM1002X User Manual This page includes Restore Factory Settings, Update Configuration file and Export Configuration file. Restore Factory Settings：The existing settings will be lost, all restored to the factory defaults; Update Configuration file：Connect PC and device with a USB cable, click “Brower” to select a Bin file, then begin to update the configuration file, the device will automatically reboot after updated completely.
EFLINKM1002X User Manual 4.9.4 Reboot Router Click the “Reboot Router” button, then the MiFi will reboot immediately. You can also restart it by the power key. Figure 4‐9‐4‐1 Reboot Router 4.9.5 Power Off Router Click the “Power Off Router” button, then the MiFi will Power off immediately. You can also power off by the power key. Figure 4‐9‐5‐1 Power Off Router AsiaTelco Technologies Co.
EFLINKM1002X User Manual 4.9.6 Time Setting From the “Time Setting” page, you can set the time of the device system, click “Save Current Time” to take effect. Figure 4‐9‐6‐1 Time Setting 5. Revision History Author Revision Changes Date Fhan V1.0 Initial Draft 2016‐10‐09 AsiaTelco Technologies Co.
EFLINKM1002X User Manual FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
