LMU-303x CalAmp LMU-303x Hardware and Installation Guide
LMU-303x Hardware & Installation Guide CalAmp reserves the rights to these documents and any information contained therein. Reproduction, use or disclosure to third parties without express permission is strictly prohibited. ©2018 CalAmp Table of Contents 1 2 3 Introduction .......................................................................................................................................... 4 1.1 About This Manual ......................................................................
LMU-303x Hardware & Installation Guide 4 Installing the LMU............................................................................................................................... 16 4.1 Preventing Accidental or Unauthorized Modification ................................................................ 16 4.2 Installing the LMU in a vehicle .................................................................................................... 16 4.3 Installation Verification .......................
LMU-303x Hardware & Installation Guide IMPORTANT: DO NOT INSTALL OR USE THE SOFTWARE OR DOCUMENTATION UNTIL YOU HAVE READ AND AGREED TO THE LICENSE AGREEMENT AND REVIEWED THE LIMITED WARRANTY AND REGULATORY INFORMATION. 1 Introduction Welcome to the LMU-303x™ Hardware and Installation Guide.
LMU-303x Hardware & Installation Guide public safety communications and critical infrastructure and process control applications. For additional information, please visit the Company’s website at www.calamp.com. 1.4 About the CalAmp Location Messaging Unit-LMU-303x™ The CalAmp Location and Messaging Unit-LMU-303x™ (LMU-303x™) is a mobile device that resides in private, commercial or government vehicles.
LMU-303x Hardware & Installation Guide 2 System Overview 2.1 Overview The entire purpose behind a fleet management system is to be able to remotely contact a vehicle, determine its location or status, and do something meaningful with that information. This could include displaying the vehicle location on a map, performing an address look-up, providing real-time driving directions, updating the vehicles ETA, monitoring vehicle and driver status or dispatching the vehicle to its next pick up.
LMU-303x Hardware & Installation Guide 2.2 Component Descriptions 2.2.1 Wireless Data Network The Wireless Data Network provides the information bridge between the LM Direct™ server and the LMU303x™. Wireless data networks can take a variety of forms, such as cellular networks, satellite systems or local area networks. Contact the CalAmp sales team for the networks available to the LMU-303x™. 2.2.
LMU-303x Hardware & Installation Guide 2.2.5 PULS™ PULS™ (Programming, Update and Logistics System) is CalAmp’s web-based maintenance server offering out-of-the-box hands free configuration and automatic post-installation upgrades. PULS™ provides a means for configuration parameters, PEG-2 scripts, and firmware to be updated Over-The-Air (OTA) and allows CalAmp customers to monitor unit health status across your customers’ fleets to quickly identify issues before they become expensive problems. 2.2.
LMU-303x Hardware & Installation Guide 3 Hardware Overview 3.1 Location Messaging Unit-LMU-303x™ 3.1.1 LMU-303x™ Handling Precautions Electrostatic Discharge (ESD) Electrostatic discharge (ESD) is the sudden and momentary electric current that flows between two objects at different electrical potentials caused by direct contact or induced by an electrostatic field.
LMU-303x Hardware & Installation Guide The GPS receiver can be damaged if exposed to an RF level that exceeds its maximum input rating. Such exposure can happen if a nearby source transmits an RF signal at sufficiently high level to cause damage. Storage and Shipping One potential source of EOS is proximity of one LMU-303x™ GPS Antenna to another LMU-303x™ GSM Antenna. Should one of the units be in a transmit mode the potential exists for the other unit to become damaged.
LMU-303x Hardware & Installation Guide 3.1.3 Environmental Specifications The LMU-303x™ is designed to operate in environments typically encountered by fleet vehicles, including wide temperature extremes, voltage transients, and potential interference from other vehicle equipment. To ensure proper operation in such an environment, the LMU-303x™ was subjected to standard tests defined by the Society of Automotive Engineers (SAE). The specific tests included temperature, shock, vibration, and EMI/EMC.
LMU-303x Hardware & Installation Guide Humidity 0% to 95% relative humidity, at 50° C non-condensing Shock and Vibration SAE Test: SAE J1455 Compliant Mil Standard 202G and 810F Compliant Ground vehicle environment with associated shock and vibration Electromagnetic Compatibility (EMC/EMI) SAE Test: SAE J1113 Parts 2, 12, 21 and 41 Compliant FCC Part 15B, IC, CE, GCF, RoHS EMC compliant for a ground vehicle environment Operating Voltage Range 12/24 VDC Vehicle systems Power Consumption Active Standby: 140m
LMU-303x Hardware & Installation Guide Data Support: UDP, SMS 3.2 LMU-303x™ Connectors 3.2.1 Primary Connector The LMU-303x equips a 16-Pin J1962 Compliant OBD-II Plug that also supports the following OBD-II physical layer interfaces: 1. ISO 15765 CAN 2. ISO 9141-2 K-Line 3. ISO 14230 KWP2000] 4. J1850 PWM 5. J1850 VPW Connector on Vehicle side Connector on LMU-303x side Please note that only 13 out of the 16 connector pins are actually populated on the connector.
LMU-303x Hardware & Installation Guide 5 Signal Ground 6 Can High ISO 15765-4 and SAE-J2284 7 K line ISO 9141-2 and ISO 14230-4 8 Make/Model Specific 10 Bus- Line 11 Make/Model Specific 14 Can Low ISO 15765-4 and SAE-J2284 15 L line ISO 9141-2 and ISO 14230-4 16 Battery Power Ground Vendor Option SAE-J1850 PWM and SAE-1850 VPW Vendor Option Power 3.2.2 Serial Adapter Depending on the variant of the LMU303x, the LMU-303x may or may not have an external serial connector.
LMU-303x Hardware & Installation Guide Input 3: Vbatt Low Input 4: Vin Active (On LMU-303x use Input 4 for Ignition Input Wake Up Monitor instead of Input 0) Analog to Digital Inputs A/D 0: Vin A/D 1: uP Temp A/D 2: Vref A/D 3: Battery Outputs A/D 4: Impact Output 4: Power Supply Switch (cleared = switch to external power, set = switch to internal power) Output 5: Enable/Disable Battery charging (cleared = enable battery charging, set = disable battery charging) 3.3.
LMU-303x Hardware & Installation Guide 3.3.2 Status LEDs The LMU-303x™ contains one dual-colorstatus LEDs (amber and green). Please note that there are PEG configuration parameters that can change the factory default behavior of all LEDs.
LMU-303x Hardware & Installation Guide 2. Plug the unit into the OBD2 connector of the vehicle while it is running, and do NOT turn off the ignition. 3. Leave the unit plugged in with vehicle ignition on until the detection process has completed. Vehicle detection status can be checked through SMS over the air or with AT Commands using the CalAmp serial connection cable. The AT Command to check vehicle detection status.
LMU-303x Hardware & Installation Guide -Veh DetYes VIN: Proto:5 Params:0,1,4,7,8,11,12 Inds:0(000000000011),1(11111111111) DTCs Cnt:7 Flt Mtch:1 4. Once the vehicle detection has completed the vehicle ignition can then be turned off. 4.3 Installation Verification In many cases it is desirable to verify that an installed LMU-303x™ is working properly.
LMU-303x Hardware & Installation Guide Radio Access : LTE Network Reg. : Yes, Home Data Reg. : Yes, Home Connection : Yes RSSI : BER : 99 Channel : 737 Cell ID : 3441 Base Station ID : 40 Local Area Code : 31003 -97 dBm Network Code : 410 Country Code : 310 IMEI (Modem S/N): 351802055396182 IMSI (SIM ID) : 310410202524377 ICC-ID (SIM S/N): 89014102212025243778 Phone Number : GPRS APN : ISP.CINGULAR Maint. Server : maint.vehiclelocation.com(216.177.93.
LMU-303x Hardware & Installation Guide If the LED is not visible then GPS service may be verified using an AT Command: AT$APP GPS? The response should be similar to: Lat=3304713, Lon=-11727730, Alt=0 Hdg=113 Spd=0 3D-RTIME HDOP=130 nSats=7 Installers are looking for the 3D-RTIME setting along with a valid Lat, Long pair (i.e. something other than 0).
LMU-303x Hardware & Installation Guide The installer will need to verify with a backend technician that the, URL (myURL.myCompany.com ), IP address (ddd.ddd.ddd.ddd) and port () are correct. The second step is to verify that the LMU-303x™ is sending data. The best way to do this is to force the LMU303x™ to send in an unacknowledged Event Report (i.e.
LMU-303x Hardware & Installation Guide APP: o : The Application ID value of the LMU indicating the host platform and the wireless networking technology of the LMU. o : The current firmware version in use by the LMU COM: o : This is the signal strength the wireless modem sees from the network. In general the LMU is at least scanning for the network if the RSSI is not -113. o [.
LMU-303x Hardware & Installation Guide The current Access Point Name in use by a GSM LMU. GPS: o [Antenna ]: This field, if present, indicates a problem with the LMU’s GPS antenna. A value of Short indicates that the antenna cable has likely been crushed. A value of Open indicates that the antenna cable is either cut or disconnected. A value of Off indicates that the LMU’ GPS receiver is off.
LMU-303x Hardware & Installation Guide o : This is the current UDP port the LMU will use to deliver its LM Direct™ data. This value should match UDP port you are using on your LM Direct™ server. It is typically 20500. o : This is the current UDP/IP messaging protocol in use by the LMU. In general it should be LMD. Example Response APP:081 8.3d COM:0 GPS:No Time Sync INP:11100111 13.7V MID:4141000100 ESN INB:207.7.101.
LMU-303x Hardware & Installation Guide 6551 City West Parkway Eden Prairie, MN 55344 2177 Salk Avenue, Suite 200 Carlsbad, CA 92008 40 Pequot Way Canton, MA 02021 13655 Dulles Technology Drive, Suite 200 Herndon, VA 20171 5th Floor Five Lamps Place 77-80 Amiens, Street Dublin 1 D01 A7V2 Republic of Ireland 6 License Agreement FOR SOFTWARE, APPLICATION PROGRAMING INTERFACES (APIs) & DOCUMENTATION IMPORTANT: DO NOT INSTALL OR USE THE SOFTWARE OR DOCUMENTATION UNTIL YOU HAVE READ AND AGREED TO THIS LICENSE
LMU-303x Hardware & Installation Guide computer programs, libraries and related materials either contained on the media provided to you by or from CalAmp, or which you have received or downloaded electronically. “Application” means a compiled or executable software program created by Developer that uses some or all of the functionality of the Software.
LMU-303x Hardware & Installation Guide hereunder or subsequently provided to you. “Related Materials” means all other materials and whatever is provided by or from CalAmp, and the non-Software and non-Documentation contained on the media supplied, downloaded, or otherwise supplied by or from CalAmp for use with the Software and Documentation. “Server” means a single, networked computer that is accessible to other client machines on the network.
LMU-303x Hardware & Installation Guide Documentation is installed or accessed from the storage device. A Developer License may not be shared or COMPANY CONFIDENTIAL: CalAmp reserves all rights to these documents and any information contained therein. Reproduction, use or disclosure to third parties without express permission is strictly prohibited.
LMU-303x Hardware & Installation Guide used concurrently on different computers. One backup copy may be made for each legally obtained media copy or electronic copy you have received, provided that all CalAmp and third party licensor information — including copyright notices — are maintained and possession of the copy is retained in a secure location. In addition, you agree to use reasonable efforts to protect the Software and Documentation from unauthorized use, reproduction, distribution or publication.
LMU-303x Hardware & Installation Guide Use Licenses: For each Server or Site License purchased, CalAmp grants the Customer the right to distribute Applications on a single Server or at a single Site, as the case may be, accessible to the number of individual users (not concurrent users) for which the Server or Site License has been purchased as evidenced by a CalAmp License Certificate.
LMU-303x Hardware & Installation Guide General: This Agreement represents our entire understanding and agreement regarding the Software, Software Copies, Documentation, Documentation Copies and Related Materials and supersedes any prior purchase order, communication, advertising or representation and may only be modified in a written amendment signed by an authorized CalAmp representative or by a specific prior or subsequent written agreement between the parties.
LMU-303x Hardware & Installation Guide MAXIMUM LIABILITY FOR ANY CLAIM ARISING IN CONNECTION WITH THE SOFTWARE, DOCUMENTATION AND/OR RELATED MATERIALS (WHETHER IN CONTRACT, TORT, INCLUDING NEGLIGENCE, PRODUCT LIABILITY OR OTHERWISE) SHALL NOT EXCEED THE LICENSE FEES PAID COMPANY CONFIDENTIAL: CalAmp reserves all rights to these documents and any information contained therein. Reproduction, use or disclosure to third parties without express permission is strictly prohibited.
LMU-303x Hardware & Installation Guide BY YOU WITH RESPECT TO THE SOFTWARE, DOCUMENTATION AND/OR RELATED MATERIALS AT ISSUE. SOME STATES DO NOT ALLOW THE LIMITATION OR EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE FOREGOING PROVISION, WITH RESPECT TO EXCLUDING OR LIMITING SUCH DAMAGES, MAY NOT APPLY TO YOU. Acknowledgement: You acknowledge that you have read this LIMITED WARRANTY, understand it and agree to be bound by its terms and conditions.
LMU-303x Hardware & Installation Guide 8 Regulatory Information Human Exposure Compliance Statement Pursuant to 47 CFR § 24.52 of the FCC Rules and Regulations, personal communications services (PCS) equipment is subject to the radio frequency radiation exposure requirements specified in § 1.1307(b), § 2.1091 and § 2.1093, as appropriate. CalAmp DataCom Inc.
LMU-303x Hardware & Installation Guide Compliance Statement (Part 15.105(b)) Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
LMU-303x Hardware & Installation Guide non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Cet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec une autre antenne ou un autre émetteur, exception faites des radios intégrées qui ont été testées. COMPANY CONFIDENTIAL: CalAmp reserves all rights to these documents and any information contained therein.
