Telink DONGLE TLSR8208ADG56D User Manual AN-20082700-E1 Ver.0.1.0 2022/01/21 Keyword Feature;2.
Telink DONGLE TLSR8208ADG56D user manual Published by Telink Semiconductor Bldg 3, 1500 Zuchongzhi Rd, Zhangjiang Hi-Tech Park, Shanghai, China © Telink Semiconductor All Right Reserved Legal Disclaimer The information contained in this document is confidential, privileged, and proprietary to Telink Semiconductor (Shanghai) Co, Ltd. and its related entities (“Telink”). The use and dissemination of this document is governed by the confidentiality/nondisclosure/disclaimer statement herein.
Telink DONGLE TLSR8208ADG56D user manual Revision History Version Change Description V0.1.0 Initial release. Telink Confidential and Proprietary 2 Ver.0.1.
Telink DONGLE TLSR8208ADG56D user manual Table of Contents Revision History.......................................................................................................................................................................................................................2 Table of Contents .........................................................................................................................................................................................................
Telink DONGLE TLSR8208ADG56D user manual 1. Product Introduction This is a user manual for Telink DONGLE TLSR8208ADG56D. 1.1 General description The Telink DONGLE TLSR8208ADG56D, which is based on Telink TLSR8208A chip. The TLSR8208A supports standards and industrial alliance specifications including Bluetooth 5.0 and Bluetooth low energy ( LE). The embedded 2.4 GHz transceiver supports Bluetooth low energy as well as 2.4 GHz operation. 1.2 Key features 1.2.1 RF Features 1. Bluetooth/2.
Telink DONGLE TLSR8208ADG56D user manual . Deep sleep with SRAM retention, with 32K RC oscillator on @ 0.6 V: 1.45 µA (with 16 KB SRAM retention) 1.2.4 Bluetooth LE Features 1. Fully compliant with Bluetooth 5.0 2. Mesh support 3. Single-antenna AOA/TX and multi-antenna AoD/TX BLE location 1.3 Supply power The TLSR8208ADG56D only supports supply power via USB(5V). As shown in figure 2-1, the marker is the USB port. Power can be supplied when USB is plugged in.
Telink DONGLE TLSR8208ADG56D user manual 1.4 Download firmware There are one ways to download firmware, SWS burning. But need another burning tool Telink Burning EVK. Telink Burning EVK have 3.3V/SWS/GND port. When using SWS download firmware, connect 3.3V/SWS/GND of dongle to 3.3V/SWM/GND of Burning EVK. The connection mode is shown in Figure 2-2. 1.5 Functions of each module As shown in figure 2-3, The functions of each module on the board have been marked.