Telink Dongle TLSR9518ADG80D User Manual AN-20082700-E1 Ver.0.1.0 2021/04/07 Keyword Feature;2.
Telink Dongle TLSR9518ADG80D user manual Published by Telink Semiconductor Bldg 3, 1500 Zuchongzhi Rd, Zhangjiang Hi-Tech Park, Shanghai, China © Telink Semiconductor All Right Reserved Legal Disclaimer The information contained in this document is confidential, privileged, and proprietary to Telink Semiconductor (Shanghai) Co, Ltd. and its related entities (“Telink”). The use and dissemination of this document is governed by the confidentiality/nondisclosure/disclaimer statement herein.
Telink Dongle TLSR9518ADG80D user manual Revision History Version Change Description V0.1.0 Initial release. Telink Confidential and Proprietary 2 Ver.0.1.
Telink Dongle TLSR9518ADG80D user manual Table of Contents Revision History ........................................................................................................................................................................................................................2 Table of Contents .......................................................................................................................................................................................................
Telink Dongle TLSR9518ADG80D user manual 1. Product Introduction This is a user manual for Telink Dongle TLSR9518ADG80D. 1.1 General description The Telink dongle TLSR9518ADG80D, which is based on Telink TLSR9518A chip. The TLSR9518A supports 2.4 GHz proprietary standard, 32-bit RISC-V micro-controller Key features, a rich set of digital and analog interfaces, hardware OTA upgrade and multiple boot switch, allowing convenient product feature roll outs and upgrades. 1.1.1 RF Features 1. 2.
Telink Dongle TLSR9518ADG80D user manual 2. User manual 2.1 Supply power The TLSR9518ADG80D supports supply power via USB . As shown in figure 2-1, the marker is the USB port. Power can be supplied when USB is plugged in. Figure 2-1 USB power supply As shown in figure 2-2, the marker is the 3.3V and GND port. 3.3V power can be supplied through the two ports. Telink Confidential and Proprietary 5 Ver.0.1.
Telink Dongle TLSR9518ADG80D user manual Figure 2-2 3.3V power supply 2.2 Download firmware There are also two ways to download firmware, USB burning or SWS burning. But need another burning tool Telink Burning EVK. Telink Burning EVK have USB port and 3.3V/SWS/GND port. When using USB download firmware, just plug dongle USB in Burning EVK. When using SWS download firmware, connect 3.3V/SWS/GND of dongle to 3.3V/SWM/GND of Burning EVK. 2.
Telink Dongle TLSR9518ADG80D user manual Figure 2-3 Function modules on the board Telink Confidential and Proprietary 7 Ver.0.1.
FCC Statement: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.